NTT docomo SH-05L Instruction Manual

Wi-fi station

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SH-05L

INSTRUCTION MANUAL

Table of Contents

Need help?

Do you have a question about the SH-05L and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo SH-05L

Page 1 SH-05L INSTRUCTION MANUAL...
Page 2: About The Manuals
This manual describes detailed guidance and operations of functions. You can download it from the DOCOMO website. z Note that “SH-05L” is referred to as “device” in this manual. z This manual contains the information available at the time of purchase.
Page 3 Appendix/Index Contents Using the device ..........2 Menu lists ............... 66 Key features of the SH-05L ......... 3 Troubleshooting (FAQ) ..........72 Precautions (ALWAYS FOLLOW THESE Warranty and After-Sales Service ......74 DIRECTIONS) ............ 5 Software update ............76 Handling precautions .........11 Main specifications ..........
Page 4: Using The Device
Using the device z The device supports LTE, W-CDMA, and wireless LAN systems. z Because the device relies on radio signals, it cannot be used in a place with no signal (such as tunnels, underground or in buildings), in places with a weak signal or outside the LTE service area or FOMA service area. You may not use the device in the upper floors of a building even with no obstructions in sight.
Page 5 Key features of the SH-05L ® LTE communication of the device supports PREMIUM 4G (LTE-Advanced) audio. PREMIUM 4G allows for high-speed communications up to 988 Mbps when receiving data. This device can simultaneously connect to multiple Wi-Fi devices, such as PCs and game consoles, using Wi-Fi.
Page 6 Cradle with built-in LAN port „ You can perform data communications by connecting your PC or other device to Cradle SH01 (provided) using a commercially available LAN cable. You can also use the LAN connection at the same time as Wi-Fi connections. Wi-Fi devices can connect over Wi-Fi even when the LAN cable is connected to the device.
Page 7: Precautions (Always Follow These Directions)
Precautions (ALWAYS FOLLOW THESE DIRECTIONS) „ Before use, read these “Precautions” carefully and use your device properly. „ These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. „...
Page 8 Handling the device, adapters, cradle Do not get the equipment wet with liquids such as water (drinking water, sweat, and docomo nano UIM card (general) seawater, pet urine, etc.). Danger May cause fires, burns, bodily injury, electric shock, etc. Do not allow liquids such as water Do not use, store or leave the equipment (drinking water, sweat, seawater, pet urine, in locations subject to high temperatures...
Page 9: Handling The Device
If any trouble such as an unusual odor, Do not apply excessive force on the unusual noise, smoking, overheating, device such as puncturing it with a sharp discoloration or deformation is found object (nail, etc.), hitting it with a hard during use, charge or storage, follow the object (hammer, etc.) or stepping on it.
Page 10 Turn off the device near high-precision When removing the docomo nano UIM electronic devices or devices that use card, be careful with the tip of the SIM weak electronic signals. eject tool or paper clip not to injure any part of your body such as fingers. May interfere with the operation of electronic devices because of signals.
Page 11: Handling Docomo Nano Uim Card
Do not apply excessive force on the If water or other liquids (drinking water, connection part with the adapter sweat, seawater, pet urine, etc.) are connected to the device or cradle. attached on equipment, immediately remove the power plug from the outlet or May cause fires, burns, bodily injury, electric shock, etc.
Page 12: Material List
Part Material/Surface treatment If there is any chance that the distance between the device and a person closest USB Type-C connection to you may get shorter than 15 cm such jack for power supply Stainless as when you cannot freely move around, (Metal section) set the device not to emit radio wave in Rubber base...
Page 13: Handling Precautions
Keeping an external connector device plugged into the external connection jack may cause a malfunction or damage. z Use only optional parts specified by NTT DOCOMO. May cause a malfunction or damage when equipment other than those specified by NTT DOCOMO are used. z Read the respective user's manuals supplied with supported optional parts carefully.
Page 14 Notes about adapters and cradle z Charge the battery in areas where the ambient temperature is between 5° C and 35° C. z Do not charge the internal battery in the following locations. y Areas with high humidity or dust, or in areas exposed to frequent vibrations y Close to household electronic equipment (TVs, radios, etc.) z Adapters or cradle may become warm during charging but this is not a malfunction.
Page 15 : All radio frequencies between 2,400 MHz and 2,483.5 MHz are used and the frequencies for mobile object identifiers can be avoided. Available channels for the device's wireless LAN are between 1 and 13. Note that other channel access points cannot be connected.
Page 16: Before Using The Device
Before using the device Part names and functions Device „ Front Bottom 1 LTE/FOMA antenna 2 LTE/Wi-Fi antenna 3 Display/Touch panel ☞ z For details on operation of the touch panel P. 23 “Using the touch panel” 4 RESET button z The device settings can be restored to the factory default settings by pressing this button with the SIM eject tool (sample) when the power to the device is on.
Page 17: Docomo Nano Uim Card
The back cover cannot be removed. Removing it forcibly may cause damage or a malfunction. The battery is built into the device and you cannot replace it by yourself. RESET button Use the SIM eject tool (sample) when pressing the RESET button. When restoring the device settings to the factory default settings, press the RESET button with the SIM eject tool for two or more seconds, and then select [YES].
Page 18 Pull out the docomo nano UIM card tray from the device z Pull out the card tray slowly and horizontally. Pulling out it forcefully or obliquely may cause damage. z When pulling them out, take care that the card does not come out of the card tray and get lost. Put the docomo nano UIM card into the docomo nano UIM card tray with the IC side turned down z Check the direction of corner cut.
Page 19: Security Codes
Removing docomo nano UIM card „ z For details on how to insert and remove the docomo nano UIM card tray, see “Inserting docomo nano UIM card” ☞ P. 15). Remove the docomo nano UIM card tray Remove the docomo nano UIM card from the docomo nano UIM card tray Turn the display side up and then insert the docomo nano UIM card tray into the device Do not insert the docomo nano UIM card into the device directly.
Page 20: Charging With Cradle
Charging The internal battery is not fully charged at the time of purchase. Be sure to charge the battery before use. z The latest charger compatible with the device can be checked on docomo online shop. ttps://onlineshop.smt.docomo.ne.jp/options/search.html) Cautions while charging „...
Page 21: Charging With Ac Adapter
With the USB Type-C connection jack on the device facing down, connect the device straight onto the USB Type-C plug for charging on the cradle z Check if the device and cradle are properly aligned. There may be damage if the device and cradle are not properly aligned when connecting and disconnecting the device.
Page 22 Charging with DC adapter DC Adapter 05 (sold separately) supplies the power for charging from a car accessory socket (12 and 24V). USB cable A to C 01 (sold separately) is required to use DC Adapter 05. For details, refer to user's guide of DC Adapter 05 and USB cable A to C 01.
Page 23: Turning Power On/Off
Turning power on/off Turning power on „ 3 (power key) (for at least 2 seconds) Turning power off/restarting „ 3 (power key) (for at least 2 seconds) [Power off]/[Reboot] Turning display on/off „ The display is turned off when 3 (power key) is pressed or the device is not in use for a set length of time. Press 3 (power key) while the display is turned off to turn it on.
Page 24: Screen Layout
While connecting to LTE, [4G+] is displayed all the time. y A small [R] is displayed at the upper left of the signal mark during international roaming. z Connected network name label (NTT DOCOMO) y Displays the connected network name (network operator).
Page 25: Using The Touch Panel
Using the touch panel The operations to use the display (touch panel) are described below. z Operations may differ depending on the function and screen in use. Cautions when using the touch panel z The touch panel is designed to be lightly touched with your finger. Do not forcefully press with your finger or a pointed object (fingernail, ballpoint pen, pin, etc.).
Page 26: About Setup
Setup About setup There are a three methods to connect devices that will communicate with this device: a method that uses a Wi- Fi connection, a method that uses the USB cable, and a method that uses the cradle. Read the descriptions for each connection method and proceed with the setup procedures.
Page 27 Checking supported devices This section describes devices that are supported by this device. For the latest information on supported devices, refer to the DOCOMO website. Ensure that your computer has the latest updates installed. Operation through a USB hub (including the USB ports on monitors and keyboards) is not guaranteed. The USB connection may not work depending on your environment and devices.
Page 28 Connecting and communicating over Wi-Fi This device can simultaneously connect to and perform data communications with multiple Wi-Fi devices, such as PCs and game consoles, using Wi-Fi. z Depending on the usage environment and connected Wi-Fi devices, it may take time until these are connected, and data communication is enabled.
Page 29 Connecting to the device by searching for the access point (manual connection) You can manually connect your Wi-Fi device to this device if it does not support WPS or if the WPS connection does not work. Device 3 (power key) (for at least 2 seconds) z The device power will turn on.
Page 30 In the home screen, [Wi-Fi Guide]▶[WPS] [Start WPS] Turn on Wi-Fi Click on the task tray Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect] z A message about PC sharing may be displayed. For a share on the PC, refer to Windows help. z It will take about two minutes until the setup procedures is completed.
Page 31 In the home screen, [Wi-Fi Guide] [Manual Connection]▶select SSID to which to connect z The SSID, password, and security (encryption mode) of the device will be displayed. z If [SSID B] was selected, turn on [Enabled]. Turn on Wi-Fi Click on the task tray Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect]...
Page 32 Windows 8.1 „ This example describes the procedure when using a mouse. For how to use a touch panel or other input device, refer to the instruction manual for your PC. Connecting using WPS (automatic connection) You can easily set the SSID and security method required for the connection by using WPS. z To use WPS, you must set [Security] on the device to [WPA2-PSK(AES)] or [WPA/WPA2-PSK(AES/TKIP)].
Page 33 Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect] z A message about PC sharing may be displayed. For a share on the PC, refer to Windows help. z It will take about two minutes until the setup procedures is completed. z The setup procedure is completed when [WPS connection successful.] is displayed on the device.
Page 34 Turn on Wi-Fi Point the mouse at the top right of the desktop, move the mouse down, and then click (Settings) on the displayed menu (Charms) Click (Wi-Fi available) Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect] Enter the password and click [Next] z A message about PC sharing may be displayed.
Page 35 In the home screen, [Wi-Fi Guide]▶[WPS] [Start WPS] Turn on Wi-Fi From the [Start] menu, click [Control Panel], and then click [Network and Internet]▶ [Network and Sharing Center] Click [Connect to a network] Setup...
Page 36 Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect] z It will take about two minutes until the setup procedures is completed. z The setup procedure is completed when [WPS connection successful.] is displayed on the device. When a device that used WPS setup is connecting to this device, other Wi-Fi devices may be disconnected.
Page 37 Turn on Wi-Fi From the [Start] menu, click [Control Panel], and then click [Network and Internet]▶ [Network and Sharing Center] Click [Connect to a network] Select the SSID of the device, select the [Connect automatically] check box, and then click [Connect] Enter the password and click [OK] Setup...
Page 38 Connecting a Mac This example describes the procedure for macOS Mojave 10.14.3. The windows may differ depending on your version of macOS. Device 3 (power key) (for at least 2 seconds) z The device power will turn on. Wi-Fi will be turned on and [ ] will be displayed.
Page 39 Select the SSID of the device from the [Network Name] pulldown list. Enter the password in the [Password] field, select the [Remember this network] check box, and then click [Join] Setup...
Page 40: Connecting An Android Device
Connecting an Android device The operations and screens will depend on your Android device and its version of Android. For details, refer to the instruction manual for your Android device. Connecting using WPS (automatic connection) If the Android device supports the WPS push button method, you can easily set the SSID and security method required for the connection.
Page 41 z The device power will turn on. Wi-Fi will be turned on and [ ] will be displayed. The device will automatically connect to the Internet with the default settings. [ ] will be displayed if the device successfully connects to the Internet.
Page 42 Connecting using the QR code display function of the device You can automatically connect a device to this device by reading the QR code displayed on this device with the camera on the connecting device. This example describes the procedure for Android 9 Pie. z The QR code reader installed on your Android device may not be able to automatically perform Wi-Fi settings.
Page 43 [Manual Connection]▶select SSID to which to connect z The SSID, password, and security (encryption mode) of the device will be displayed. z If [SSID B] was selected, turn on [Enabled]. iPhone In the home screen, [Settings]▶[Wi-Fi] Set [Wi-Fi] to ON Touch the SSID of the device from the list screen Enter password correctly▶[Join] Setup...
Page 44 Connecting using the QR code display function of the device You can automatically connect a device to this device by reading the QR code displayed on this device with the camera on the connecting device. This example describes the procedure for an iPhone (iOS 12.3.1). Device 3 (power key) (for at least 2 seconds) z The device power will turn on.
Page 45 Nintendo Switch In the HOME menu, [System Settings] [Internet]▶[Internet Settings] Touch the SSID of the device from the list screen Enter password correctly▶[OK] z The settings will be saved. The setup procedure is completed when a connection successful message is displayed.
Page 46 Connecting a Nintendo 3DS This example describes the procedure for Nintendo 3DS/3DS LL. z All screenshots used in this procedure are from the Nintendo 3DS. Device 3 (power key) (for at least 2 seconds) z The device power will turn on. Wi-Fi will be turned on and [ ] will be displayed.
Page 47 Connecting using WPS (automatic connection) You can easily set the SSID and security method required for the connection by using WPS. z To use WPS, you must set [Security] on the device to [WPA2-PSK(AES)] or [WPA/WPA2-PSK(AES/TKIP)]. Nintendo 3DS [Wi-Fi PROTECTED SETUP] (WPS) [プッシュボタンによる接続] (Push button connection) Device In the home screen, [Wi-Fi Guide]▶[WPS]...
Page 48 Connecting to the device by searching for the access point (manual connection) Device In the home screen, [Wi-Fi Guide] [Manual Connection]▶select SSID to which to connect z The SSID, password, and security (encryption mode) of the device will be displayed. z If [SSID B] was selected, turn on [Enabled].
Page 49 Enter password correctly▶[決定] (Decision) [OK] [OK] z The connection test will start. The setup procedure is completed when a connection successful message is displayed. Setup...
Page 50 Connecting and communicating over the USB cable You can directly connect the device to a PC with USB cable A to C 01 (sold separately) for data communications. Connecting the device to a PC „ 3 (power key) (for at least 2 seconds) z The device power will turn on.
Page 51 Connecting and communicating using the cradle You can use this device as a wired router by connecting it to Cradle SH01 (provided). A PC connected to the cradle with a LAN cable can connect to the Internet using the device's LTE line. z Always connect the cradle to a power outlet using AC Adapter 07 (sold separately).
Page 52: Setting Tool
Settings (Web browser) Setting tool You can configure the various functions of the device using a web browser from a PC or mobile device connected to the device. This example describes the procedure when the PC is connected over Wi-Fi. The screens may differ depending on your operating system and web browser.
Page 53 Ending the session In the setting tool screen, click [Logout] For Android devices/iPhone/iPod touch/iPad „ Connect the Android devices/iPhone/iPod touch/iPad to the device Start the web browser and enter “http://(host IP Address of the device)/” or “( h ttp://web. setting) ”...
Page 54: Connected Clients
9 Data Usage z Displays the amount of data that was used. You can also check the data usage limit, the elapsed since the data usage was last reset, and the date of the last reset. The displayed data usage is an approximation. You can check the actual data usage on My docomo. Connected clients Set MAC address filtering (a function that allows you to restrict by MAC address Wi-Fi devices that can connect).
Page 55 Network You can set the mobile network, APN profile settings, and PIN code for the docomo nano UIM card. In the setting tool screen, click [Network] z The Network screen appears. Set the following items ☞ z For the setting ranges and default values P.
Page 56: Lan Settings
Settings LAN settings You can set the DHCP server (that allocates IP addresses to devices on the LAN), firewall (that prevents invalid access from the Internet), and other functions. DHCP server „ Set the DHCP server (that allocates IP addresses to devices on the LAN). In the setting tool screen, [Settings]▶[LAN Settings] Click [DHCP Server] Set the following items...
Page 57: Port Mapping
Port mapping „ Set rules to allow access from the Internet to a specific device on the LAN. Set rules to make servers and FTP public and to use certain online games and messaging software. In the setting tool screen, [Settings]▶[LAN Settings] Click [Port Mapping] Click [Add Rule] Set the following items...
Page 58 Show SSID and security key on Touch Screen: Set whether to show the SSID, password, and security „ (encryption mode) of the device when [Wi-Fi Guide]▶[Manual Connection]▶SSID is selected on the home screen of the device. „ Interface: Select the interface (SSID A, SSID B). This can be selected when [Multi-SSID] is set to [Enabled]. z A QR code will be displayed on the right side of the selected interface that can be used to connect to Wi-Fi by reading the QR code with the camera on a smartphone or other device.
Page 59: Device Settings
„ A WPS connection can be started from the setting tool when using WPS to connect a Wi-Fi device. In the setting tool screen, [Settings]▶[Wi-Fi Settings] Click [WPS] Click [Start] z Click [Stop] when stopping a WPS connection after it has been started. Use the Wi-Fi device and connect to the device ☞...
Page 60 Backup/Restore „ The content set on the device can be saved to a PC and the saved setting information can be loaded into the device. z You may not be able to specify a destination folder and file name depending on the web browser settings. ☞...
Page 61 Set automatic restarts You can set the device to restart at the specified time after the specified number of days has elapsed. z The default setting is [Disabled]. In the setting tool screen, [Settings]▶[Device Settings] Click [Reboot] Click [Enabled] for the [Automatic Reboot] Set the number of days and time in [Automatic Reboot Time] field Click [Apply] About...
Page 62: Device Menu
Settings (Device menu) Device menu You can change many of the settings and check the content of those settings from the menu on the device. z However, a portion of the functions cannot be set on the device. You can set all functions by using the setting tool ☞...
Page 63: Data Usage
To select an item „ z Touch the item to select. z If [ ] is displayed, touch [ ] to select it. z If [ ] is displayed, touch [ ] to turn it off, and touch [ ] to turn it on. Data usage You can set a limit on data usage for the current month.
Page 64 Settings Mobile network Set the network mode to use for the mobile network, international roaming, and other settings. In the home screen, [Settings]▶[Mobile Network] Set the following items ☞ z For the setting ranges and default values P. 71 “Menu list (device menu)” ☞...
Page 65 Software update ☞ For details on software updates, see “Software update” ( P. 76). Sleep mode Set whether to automatically turn off Wi-Fi if the device is not used for a certain amount of time when no Wi-Fi devices are connected. z Sleep mode is not functioned in the following cases.
Page 66: Outline Of International Roaming (World Wing)
International Roaming Outline of international roaming (WORLD WING) International roaming (WORLD WING) is a service that allows you to use the device in the service area of DOCOMO affiliated overseas network operators when using the device overseas. For details on the international roaming (WORLD WING), refer to the DOCOMO website. ttps://www.nttdocomo.co.jp/service/world/roaming/) Available network You can use the device in the LTE network and 3G network service areas.
Page 67: Settings For Use Overseas
Settings for use overseas International roaming You need to set [International Roaming] to [ON] to use packet communication overseas. In the home screen, [Settings]▶[Mobile Network]▶[International Roaming]▶set to ON z When the confirmation screen is displayed, check the content and select [OK]. Network mode Set a network to use.
Page 68: Menu Lists
Appendix/Index Menu lists Menu list (web browser) View on Backup/ Menu item/setting item Setting range Default value portable Reference Restore device Home 日本語, English P. 51 言語日本語 ○ ○ Connected Clients Client List P. 52 MAC Address Filtering MAC Address Filter Enabled, Disabled Disabled P.
Page 69 View on Backup/ Menu item/setting item Setting range Default value portable Reference Restore device Name Up to 64 singlebyte ○ alphanumeric characters * Other than those characters above may be limited to a maximum of 21 characters. Password Up to 32 singlebyte ○...
Page 70 View on Backup/ Menu item/setting item Setting range Default value portable Reference Restore device IP Address Filtering Filter mode Blacklist, Whitelist Blacklist P. 54 ○ Add Rule LAN IP Address 0.0.0.0 to ○ 255.255.255.255 LAN Port 1 to 65535 ○ WAN IP Address 0.0.0.0 to ○...
Page 71 View on Backup/ Menu item/setting item Setting range Default value portable Reference Restore device Interface SSID A, SSID B SSID A P. 55 ○ SSID Up to 32 single- SSID A: ○ ○ byte alphanumeric SH-05La- characters XXXXXX * There may be a SSID B: SH-05Lb- restriction to a XXXXXX...
Page 72 View on Backup/ Menu item/setting item Setting range Default value portable Reference Restore device Device Settings Web UI Password 8 to 32 single-byte admin P. 57 ○ alphanumeric characters/symbols Data Usage Settings Reset P. 57 ○ Maximum Data 0 MB or more 7 GB ○...
Page 73 Menu list (device menu) Backup/ Menu item/setting item Setting range Default value Reference Restore Data Usage Data Usage Settings 1 to 999 GB 7 GB P. 61 ○ Client List P. 60 About Device P. 60 Wi-Fi Guide QR Code Connection P.
Page 74: Troubleshooting (Faq)
P. 18 “Cautions while charging” y Is an adapter specified by NTT DOCOMO being used for charging? Contact the number listed in “Repairs” (in Japanese only) on the last page or a repair counter that DOCOMO specifies if you cannot charge the battery even when using a specified one.
Page 75: Error Messages
y Make sure a USB HUB or conversion plug is not used. Using a USB HUB or conversion plug may prevent the equipment from working normally. z docomo nano UIM card is not recognized ☞ y Is the docomo nano UIM card inserted facing right direction? P.
Page 76: Warranty And After-Sales Service
z [No updates is available at this time.] y This message is displayed when an attempt is made to update the software but the software being used is already ☞ the latest version. You can keep using it. P. 76 “Updating software” z [Reach to max PUK retry.
Page 77: After-Sales Services
After-sales services If you have problems with your device „ Refer to “Troubleshooting” on this manual before requesting repairs. Contact the number listed in “Repairs” (in Japanese only) on the last page if problems persist. If your device needs repairs after contacting DOCOMO „...
Page 78: Updating Software
Software update Software update is a function of updating software to use the device safely and comfortably. Be sure to keep the version up-to-date, since the following contents are included. The following two kinds of software update are available. z Addition of new function Improve function/operations and you can use the device comfortably by upgrading the device function.
Page 79: Main Specifications
Main specifications Device „ The specifications may change due to software updates. For the latest information, refer to the DOCOMO website. Product name SH-05L Size Approx. 72 (H) × Approx. 108 (W) × Approx. 15 (D) mm Weight Approx. 150 g Type Approx.
Page 80 y 256QAM y 4×4 MIMO (band 42) y 4×4 MIMO (band 3) y Band 1 (2.0 GHz) + Band 3 (1.7 GHz) y Band 1 (2.0 GHz) + Band 19 (800 MHz) y Band 1 (2.0 GHz) + Band 21 (1.5 GHz) y Band 1 (2.0 GHz) + Band 28 (700 MHz) y Band 3 (1.7 GHz) + Band 19 (800 MHz) y Band 3 (1.7 GHz) + Band 28 (700 MHz)
Page 81 *2 Continuous stand-by time varies significantly depending on the setting state and usage environment as well as the usage frequency of the various functions. *3 If various functions are used frequently, the actual time may become less than half. *4 MIMO is supported. Cradle SH01 „...
Page 82: Specific Absorption Rate (Sar) Of Mobile Terminals
Specific Absorption Rate (SAR) of Mobile Terminals This model SH-05L device complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This device was designed in observance of Japanese technical regulations regarding exposure to radio waves (*1) and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
Page 83 Regulatory information Hereby, SHARP CORPORATION declares that the radio equipment type SH-05L is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: ttps://jp.sharp/k-tai/) (in Japanese only) Manufacturer's Address:...
Page 84 FCC Notice z This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. z Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Page 85: Export Administration Regulations
Registered trademarks and trademarks z “FOMA” , “mopera U” , “WORLD WING” , “sp-mode” , “Premium 4G” and the “Wi-Fi STATION” logo are trademarks or registered trademarks of NTT DOCOMO, INC. ® ®...
Page 86 Index Fast Boot ....... . 63 Numerics 3G ........65 4G .
Page 87 Rule Name ....... 55 Screen layout ......22 Screen lock .
Page 88 Checking your charges, data volume and subscription, and carrying out various procedures, etc. online From a PC My docomo (https://www.nttdocomo.co.jp/mydocomo/) (in Japanese only)　 ●You may not be able to access some website services due to system maintenance, the content of your subscription, etc. ●“Network security code”...
Page 89 ●Please confirm the phone number before you dial. ●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or check the docomo Shop etc. near you on the NTT DOCOMO website and contact. NTT DOCOMO website https://www.nttdocomo.co.jp/english/ Inquiries from overseas (In case of loss, theft, unconnected, etc.) (Business hours: 24 hours (open all year round)) ■From DOCOMO mobile phones...