Firmware Update; Maintenance - VOCOlinc Flowerbud Smart Diffuser Manual

Firmware Update

To gain better experience with VOCOlinc products, we strongly recommend that you
update the firmware whenever updates with all the latest improvement and fixes are
available:
1. Open the VOCOlinc app.
2. Long press device icon to enter the main page.
3. Look for "Firmware update" and then tap "Update" when you see a prompt.
* Only the devices that are currently reachable and have an available update will prompt
firmware update notice.
* It is important to leave the VOCOlinc app running while it finishes updating the device.
DO NOT to minimize the app, close the app, or interrupt the update until the updates
are successful to prevent problems.
Warnings
• Max. work time: 8 hours
The amount and intensity of mist produced varies according to water type, the amount
of water, humidity, temperature, air currents.
Therefore, it should not be considered as a fault.
• Use 100% natural water-soluble essential oils ONLY. Other oils that contain chemical
ingredients, flavors or impurities may cause damage to the device.
• Before replacing with another essential oil, clean the water tank first.
Accidental Leakage
In the event of the unit being knocked over or tipped during use, please follow the steps
below to avoid damage to the device:
1. Unplug the device and remove cover.
2. Pour out any remaining water from the water tank.
3. Gently shake out the water and then dry it in open space for at least 24 hours.

Maintenance

After continuously running a cycle (8hours), or 3-5 days, clean the device following the
steps below:
1. Unplug the device and remove the cover.
2. Pour out any remaining water from tank.
3. Clean the device with warm water (add a few drips of dish washing detergent). and then
wipe it gently with dry cloth.
4. Do not use acids or enzymes detergents, as this may give off hazardous gas or cause
malfunction. Be sure to use a mild detergent.
5. If diffuser is not used for an extended period, drain water from the tank.