Download Print this page

Advertisement

Quick Links

01865 767676
sales@unicol.com
www.unicol.com
CT1 / CT2
Screen Size: n/a
Guide Max. Weight: 120kg
Revised 07/06/24
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the CT1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Unicol CT1

  • Page 1 Use of this product for anything other than its specified use may result in failure or personal injury. This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
  • Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED 3/16th Allen Key COMPONENTS DESCRIPTION CT1 Truss Clamp CT2 Truss Clamp with Safety Hook Revised 07/06/24...
  • Page 3 STEP 2 STEP 1 The CT1 & CT2 come fully assembled, so simply Once in position, tighten the wing nut so that the place it over the truss it is going to be mounted to. clamp tightens around the truss. The truss clamp should not move when knocked or wiggled.
  • Page 4 Any Questions? +44 (0)1865 767676 sales@unicol.com unicol.com/instructions...

This manual is also suitable for:

Ct2