Global Solutions GS1750 Series Operating Instructions

Electric Juicer
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
1. Read all instructions and save for future reference.
2. Before use, check that the voltage of wall outlet
corresponds to the one shown on the rating plate.
3. Unplug from the outlet when not in use, before
putting on or taking off parts, and before cleaning.
Clean motor housing with wet cloth and wipe dry. Don't
dip in water for rinse.
4. The instrument is not intended to be used by
persons disabled, with mental aberration or without
related experiences and knowledge (including
children), except they are supervised and directed by
persons who are responsible for their safety to use the
product.
5. Close supervision is necessary for any appliance
being used by or near children.
6. Do not operate any appliance with a damaged
supply cord or plug or after the appliance malfunctions
or is dropped or damaged in any manner. Return the
appliance to the nearest authorized service facility for
examination, repair, or electrical or mechanical
adjustment.
7. Don't let the supply cord hang over the edge of table
or touch a hot surface.
8. If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid hazard.
9. Don't use the appliance if the rotating cone is
damaged.
10. Switch off the appliance before changing
accessories or approaching parts which move in use.
11. Keep hands, hair, clothing, as well as other utensils
away from juicer during operation to reduce the risk of
injury to persons, and damage to the juicer.
Physical Address: Corporate HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761 • 419.542.7751 • f: 419.542.6690
OPERATING INSTRUCTIONS
April 25, 2024
globalsolutionsfoodequipment.com
Introduction:
1. Read all instructions.
2. Check the voltage of your juicer before plugging it in.
Before plugging in, ensure switch is off.
3. Wash all parts and components that come in contact
with juice. Flush them with water and let air dry.
Cleaning:
Never use abrasive steel wool abrasive or erosive liquid
(such as alcohol, gasoline or acetone) when cleaning the
juicer parts.
1. Always switch off the motor and unplug the juicer.
2. Never immerse the motor housing in water, wipe with a
damp cloth to clean it and wipe dry.
3. It is easy to detach all parts and components contact
with juice rapidly, such as juicer head, filter, juice bowl and
other apparatuses. Bowl pressing assembly shall be
detached in counterclockwise direction holding the handle.
It is quite sharp on the bowl edge; please pay more
attention to avoid scratches to your hands. When
assembling the bowl pressing assembly, note to ensure
the bowl is always in contact with the bench. Screw up in
clockwise direction. Please operate carefully to avoid
scratches to your hands.
4. Rinse all parts coming into contact with the juice
immediately after use.
5. Take care to wash all parts in contact with the juice
before using the appliance for the first time.
Specifications:
Power supply 50/60Hz
Volts 120
Watts 180
11.0"×7.75"15.50"
Dimensions(L×W×H)
Global Solutions Distribution Center/Test Kitchen
4300 E Magnolia Street | Phoenix, AZ 85034
Model Series:
GS1750