Advertisement
Quick Links
CHARGING CONNECTORS AC02 & AC03
INTRODUCTION
Charging connectors AC02 and AC03 are designed to enable charging electric vehicles (electric bicycles, scooters, etc) or powering any other loads (fire pumps,
compressors, ovens, etc) with normal Schuko (Type F) 16 A or 16A CEE plugs from EV charging stations with Type 2 (IEC 62196) sockets. They send signals "vehicle
connected" and "vehicle ready to charge" to the charging station thus enabling charging a vehicle or powering other loads from connector outlet.
Any other use is not allowed and is regarded as improper use.
Before using the charging connector, please thoroughly read this manual and follow the instructions provided therein. Please keep the manual for future use. If you
are unsure about the proper usage, please contact the manufacturer or your dealer before usage.
IMPROPER USE
Improper use can lead to property damage or personal injury. In such cases, the manufacturer and retailer accept no liability. Warranty will be voided in case of
improper use. You must not:
• modify/manipulate the charging connector!
• drive over the charging connector!
• draw more than specified current/power!
• connect unsuitable plugs and cables!
• use the charging connector if damaged!
GENERAL SAFETY INSTRUCTIONS
• Carefully read this security instructions before using the product!
• Never draw more than specified current/power from the charging connector!
• Children are not allowed to use the charging connector.
• Keep animals away while using the charging connector.
• Avoid liquids entering the charging connector. Never use the charging connector if the socket or plug is wet.
• Only connect undamaged, designated and labelled plugs & cables to the charging connector.
SYMBOLS USED
The following symbols are used in this manual and on the product:
This symbol indicates a danger with a risk of coursing serious injury or death or damage if not avoided.
CE symbol is a mark of conformity indicating that a product complies with European Union directives and regulations.
This symbol signifies the requirement for separate disposal of electrical and electronic waste. See chapter disposal.
Please read the manual before using the charging connector.
Risk of electric shock due to dangerous voltage when used incorrectly.
Do not use and store the charging connector below or above the specified temperature.
Podnart 33, SI-4244 Podnart
www.eauto.si
info@eauto.si
USER MANUAL
B
A
+386 51 320 538
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METRON AC02
Summary of Contents for METRON AC02
- Page 1 INTRODUCTION Charging connectors AC02 and AC03 are designed to enable charging electric vehicles (electric bicycles, scooters, etc) or powering any other loads (fire pumps, compressors, ovens, etc) with normal Schuko (Type F) 16 A or 16A CEE plugs from EV charging stations with Type 2 (IEC 62196) sockets. They send signals “vehicle connected”...
- Page 2 LIMITED WARRANTY METRON warrants its product to the original consumer purchaser that it will repair, or replace, any product that is determined to be defective for the following terms: Two (2) years from date of purchase on all components. The product is MOISTURE PROOF, but NOT WATERPROOF, so warranty is void in case of water penetration! To be eligible for repair or replacement under this warranty, the product in question must be sent back to METRON within the warranty period and the original consumer purchaser must comply with the following conditions: The product thereof must not have been modified or altered in any way by an unauthorized source;...
Need help?
Do you have a question about the AC02 and is the answer not in the manual?
Questions and answers