LUMEGEN LEDFLOD1000051335 Instruction Manual

LED FLOOD LIGHT INSTRUCTION MANUAL
LEDFLOD1000051335 - LG-MFL-15-3CCT-BZ-K
LEDFLOD1000051336 - LG-MFL-40/50/60-3CCT-BZ-K
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
—
To prevent personal injury or product damage only licensed electricians should install.
—
To avoid electric shock or component damage disconnect power before attempting installation or servicing.
—
Disconnect product and allow cooling prior to servicing.
—
Any alteration or modification of this product is forbidden as it may cause personal injury,death,propertydamage and/or product malfunction.
—
To prevent product malfunction and/or electrical shock this product must be properly grounded.
—
This luminaire is designed to operate in ambient temperatures ranging from -40°C to 45°C (-40
—
MIN 75°C SUPPLY CONDUCTORS.
—
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
Knuckle Mount - Default Installing
Step 1: Take the fixture out of the package.
Step 2: Insert the knuckle into the cover plate(not provided), and adjust the fixture to desired direction.
(Fig 1 & 2)
Step 3: Connect the input wires per the wiring diagram below.(Fig 3)
Step 4: Unscrew the cap to select the desired Watt/CCT/Photocell function, 15W&30W refer to Fig 4,
60W refer to Fig 5, then screw back the cap.
Step 5: Turn on the electricity to verify your successful installation.
N
G
Dim+
Dim-
Line
Black
White Neutral
Green Ground
Purple Dim+
Pink Dim-
Fig 3
LumeGen | 1000 Wes�nghouse Drive STE 1, New Stanton PA 15672 | 800-998-6977 | Lightup.com |Page |
Fig 1
L
Factory Default Setting:
CCT:5000K Photocell:ON
Specifications and dimensions subject to change without notice.
WARNING
3K 4K 5K
ON OFF
SENSOR
Fig 4
15W/30W
1
℉ to 113℉).
Fig 2
3K 4K 5K
40W 50W 60W
ON OFF
SENSOR
Fig 5
60W
Factory Default Setting:
Watt:60W CCT:5000K Photocell:ON