Download Print this page

Amped AO12S-60 Manual

Lithium iron phosphate battery lifepo4

Advertisement

Quick Links

Lithium Iron Phosphate Battery
Nominal Voltage: 38.4V
Group 31 / Bluetooth / IP67 Waterproof
Features
Wider temperature range: -20°C~60°C.
Lighter Weight: About 40%~ 50% less weight of comparable lead acid battery.
Usable Capacity: Delivers twice power of lead acid batteries.
Quality BMS: BMS (Battery Management System) will protect your battery from over charging,
discharging too low or short circuits with built in cell balancing.
Extraordinary cycle life: Offers 2000+ life cycles, up to5x longer than lead acid batteries,
helping to minimize replacement cost and reduces total cost of ownership.
Series and Parallel Configurations: Not Series Capable. Can be wired up to 4 in parallel for
higher capacity.
Voltage: Uniform voltage during discharge.
Bluetooth: Built in Bluetooth monitoring with the Amped Outdoors App.
Applications
Boat 36V Trolling Motors
Kayak 36V Trolling Motors
36V Golf Carts
Other 36V Lead Acid Applications
LiFePO
Rated Capacity: 60Ah
(Lower temperatures will result in decreased capacity)
AO12S-60
Model:
4

Advertisement

loading
Need help?

Need help?

Do you have a question about the AO12S-60 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amped AO12S-60

  • Page 1 Series and Parallel Configurations: Not Series Capable. Can be wired up to 4 in parallel for  higher capacity. Voltage: Uniform voltage during discharge.  Bluetooth: Built in Bluetooth monitoring with the Amped Outdoors App.  Applications Boat 36V Trolling Motors ...
  • Page 2 General Specifications Performance Specifications General Parameters Comments Nominal Voltage 38.4V Standard charge after Nominal Capacity 60Ah Standard discharge Energy 2304Wh Electrical Cell Combination 12S1P Characteristics Months Self Discharge ≤3.5% per month @25℃ (77℉) >2000 Cycles 0.5C Charge/0.5C Discharge Cycle Life 80% of initial capacity at 80%DOD Short Circuit Protection...
  • Page 3 User Guide Charging: Using the Amped Outdoors charger, connect the battery to the charger and then plug in the AC cable into the wall outlet. The charging light will turn blink red when charging and when the charge is complete, the light will turn green. When the charge is complete, disconnect the charger from the wall outlet as a float is not needed with our batteries.
  • Page 4 Frequently Asked Questions Do I need a special charger? A- Yes, our 36v batteries requires our 43.8V charger. How to I store my battery? A- Never store your battery fully discharged. It is best to put a 50% to full charge on your battery and then remove it from the charger. To ensure the best performance from your batteries for many years, put a short charge or use your battery at least once every 2-3 months.