Further information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 26 1.1 General information.... 4 9.1 Automatic programmes... 26 1.2 Intended use...... 4 9.2 Timed programmes .... 27 1.3 Restriction on user group.. 4 10 Accessories...... 29 1.4 Safe installation ......
Page 3
15.2 Calling up the appliance care programme.... 37 15.3 Running the basic appli- ance care programme .. 37 15.4 Running the intensive appli- ance care programme .. 38 16 Cleaning and servicing ... 39 16.1 Tips on cleaning and care .. 39 16.2 Moisture sensor.....
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
Page 10
en Safety An ingress of moisture can cause an electric shock. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories.
Preventing material damage en Clean the appliance with nothing ▶ Preventing material damage 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact Preventing material damage ATTENTION! with the appliance.
en Installation and connection After drying, clean the fluff filter 4.2 Scope of delivery → Page 31. After unpacking all parts, check for a If the fluff filter is dirty, this reduces any damage in transit and complete- the air flow in the appliance, ex- ness of the delivery.
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-...
Page 14
en Installation and connection container. Use the water outlet hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Notes ¡ Operate this appliance using the water outlet hose provided. → "Connecting the water drain hose", Page 14 If you connect the water outlet...
Page 15
Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 34. → Page 33. Connect the appliance to the water outlet.
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 29 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 30 Display → Page 19 Buttons → Page 22...
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 1:25 The timed programme is set. → "Timed programmes", Page 27 Recommendation for the maximum load capacity for the selected program in kg.
Page 20
en Display Display Description (Φύλαξη Plus) The dryness level is activated. → "Buttons", Page 22 The adjusted dryness level is activated. → "Dryness level", Page 25 (Προστασία The crease-reduction function is activated. τσαλάκωμα) → "Buttons", Page 23 (Χαμηλή Gentle drying is activated for delicate fabrics. θερμοκρ.) → "Buttons", Page 23 (Μισό...
Page 21
Display en Display Description Program end Programme status Example...
en Buttons Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description Έναρξη/Προσθήκη ¡ Start Start, cancel or pause ρούχων the programme. ¡ Cancel ¡ Pause 3 δευτ. ¡ Activate Activate or deactivate the childproof lock.
Page 23
Buttons en Button Selection Description Για φύλαξη ¡ Για φύλαξη ¡ Selecting Για φύλαξη activates the dryness ¡ +1 level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
Page 24
en Buttons Button Selection Description Λήξη σε ¡ Programme end time ¡ Set the programme end time. ¡ Programme duration The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
Dryness level en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level Dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Φύλαξη Plus Multi-layered, thick laundry The laundry is dry.
en Programmes Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 27 Υγιεινή Plus Dry hard-wearing, heat-resistant fabrics made of cotton or linen.
Page 28
en Programmes Programme Description Max. load (kg) Remove laundry once the programme has ended and allow it to dry. Ζεστό πρόγρ. χρόνου Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.
Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Connection kit To save space, stack the WTZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
en Laundry Turn the programme selector and Laundry 11 Laundry set the required programme. → "Programmes", Page 26 Laundry If required, adjust the programme 11.1 Preparing the laundry settings. → "Adjusting the programme set- ATTENTION! tings", Page 30 Objects remaining in the laundry may damage the laundry and the drum. 12.3 Adjusting the pro- Remove all items from any pock- ▶...
Basic operation en a The display shows the programme 12.10 Fluff filter duration or the programme end During drying, fluff from the laundry is time. collected in the fluff filter. The fluff fil- a After the programme has ended, ter protects the appliance from fluff. the display shows: "End".
Page 32
en Basic operation Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter. then dry them off. Open the two fluff filters.
Basic operation en Insert the two-part fluff filter. Pull out the condensation con- tainer, keeping it level. Close the door. Empty the condensation container. 12.11 Condensation con- tainer Condensation that forms in the appli- ance as it dries the laundry is collec- ted by default in the condensation container.
en Childproof lock Inserting the condensation container Push the condensation container ▶ in as far as it will go. Childproof lock 13 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two ...
Basic settings en Basic settings 14 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
en Appliance care Requirements 14.2 Changing the basic set- ¡ The drum is empty. tings ¡ The appliance is switched off. Set the programme selector to po- Clean the fluff filter. sition 1. → "Cleaning the fluff filter", Page 31 Pull out the condensation con- tainer horizontally and empty it.
Appliance care en Clean the filter in the condensation ¡ After a lengthy period of use, the container. appliance reminds you to run the basic appliance care programme. Before the programme starts or 15.2 Calling up the appliance after the programme has ended, care programme the display shows the notification "CrE".
en Appliance care Insert the condensation container Press . so that it locks into place. a "CP2" and the programme duration Switch off the appliance. alternate on the display. → "Switching off the appliance", ATTENTION! The functionality of Page 31 the appliance may be impaired if you use the wrong quantity of fab- 15.4 Running the intensive ric softener, detergent, care...
Cleaning and servicing en Insert the condensation container Remove all de- Fresh deposits so that it locks into place. tergent residue, are easier to re- Press Έναρξη/Προσθήκη ρούχων. spray residue or move without other residues leaving any a The appliance care programme immediately.
en Cleaning and servicing Clean the moisture sensor with a Remove the filter. sponge. Clean the filter under warm, run- ning water or in the dishwasher. 16.3 Condensation container Slide in the filter as far as it will go. filter During drying, fluff from the laundry gets into the condensation.
Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 42
en Troubleshooting Fault Cause and troubleshooting The appliance is not Check whether the lighting in your room or other ▶ working. appliances are working. Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶...
Page 43
Troubleshooting en Fault Cause and troubleshooting Condensation in the The remaining volume of condensation may remain in condensation tank the condensation container. even though the water Not a fault – no action required. ▶ drain hose is connec- Water drain hose is not connected correctly. ted.
Page 44
en Troubleshooting Fault Cause and troubleshooting Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
Page 45
Troubleshooting en Fault Cause and troubleshooting Odours have formed Stubborn dirt in the appliance or an extended appli- in the appliance. ance downtime of more than one month. Run the intensive appliance care programme. ▶ → "Appliance care", Page 36...
en Transportation, storage and disposal Empty the condensation container Transportation, storage and disposal 18 Transportation, stor- → Page 33. age and disposal Insert the condensation container → Page 34. Transportation, storage and disposal Disconnect the appliance's mains 18.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported.
Customer Service en Information about current disposal 19.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate.
Page 48
en Consumption values Consumption values 20 Consumption values Βαμβακερά eco programme The actual values may deviate from Consumption values (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying...
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Βαμβακερά + Για 12.0 1400 2:05 0.96 σιδέρωμα Βαμβακερά + Για 12.0 1400 1:22 0.54...
Page 50
en Technical data You can find more information about your model online at https:// eprel.ec.europa.eu/ . This web ad- dress is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the charac- ters before the slash in the product number (E-Nr.) on the rating plate.
Page 52
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the WQG245B0GR and is the answer not in the manual?
Questions and answers