bumpboxx Slapstik Operation Manual

TWS PAiRiNG
INSTRUCTiONS
1. Power on both Bumpboxx Slapstik devices. They will
automatically start in bluetooth mode and make sure both
Bumpboxx Slapstik devices have an open bluetooth connection
(Please turn off bluetooth on all previously paired cell phones
within range)
2. Tap the power button 3 times quickly on your master unit
(the one closest to your device). You will hear an immediate
chime, this means the master has entered search mode, the
pairing process can take up to 30 seconds. If you successfully
established a TWS connection, both units will produce a short
chime simultaneously and the master unit will have a flashing
blue light and the slave unit will have a solid blue light. (If this
is unsuccessful, make sure all previously paired cell phones
and other devices within range have turned off their
bluetooth function and try step 2 again)
3. Just like you would normally do, find your Bumpboxx
Slapstik on your Bluetooth list on your phone and pair to it.
4. Crank up the volume and enjoy.
BEST CARE
AND INSTRUCTIONS
• Once the unit is unpacked and has charged for
3-4 hours for the first time, you may power on and use.
• The unit may be used during the charging process.
INSIDE FLAP
VIEW OUR
HOW TO
VIDEOS
www.bumpboxx.com/howto-ss
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE;
AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE EQUIPMENT.
WARNING:
This product can expose you to chemicals including lead
and lead compounds, which are known to the state of
California to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov
BACK COVER
MAGNETIC
RUBBERIZED NEODYMIUM
MAGNETIC BACKING
OPERATION MANUAL
FRONT COVER