Canon PIXMA G3730 Installing

以下步驟及畫面僅供參考，實際操作畫面可能因裝置型號、系統或軟件版本而有所不同。
The following steps and screens are for reference only, and the actual operation screens may vary depending on
the device model, system, or software version.
無線設定 Wireless Setup
方法一: 簡易無線連接 (透過手機)
Method 1: Easy Wireless Connect (via mobile device)
確保在開始無線連接設定之前，印表機已開啟。
1.
如果電源開啟，電源指示燈閃爍，然後持續亮起。
Make sure printer is turned on before starting wireless connection setup.
If the power is on, the ON lamp flashes and then remains lit.
請按住
2. (無線連接)約三秒鐘，直至
Press and hold
lamp flashes.
根據手機作業系統按以下連結使用 Canon Print 設定無線
3.
Referring to the mobile operation system and click the link below and setup wireless with Canon Print
Android:
https://www2.canon.com.hk/services/faq/210070_WiFi_Setup_Easy_Wireless_Connect_Android.pdf
iOS:
https://www2.canon.com.hk/services/faq/210071_WiFi_Setup_Easy_Wireless_Connect_iOS.pdf
在 Windows 以無線方式安裝及連接 PIXMA G3730 打印機
Installing PIXMA G3730 on Windows via WiFi connection
(Wireless connect) for about three seconds, and then release it when the
(Wi-Fi)指示燈閃爍後鬆開。
1
(Wi-Fi)