convenience concepts MISSION 166399 Assembly Instructions

Glass console table

Download this manual

MISSION GLASS CONSOLE TABLE

ASSEMBLY INSTRUCTIONS

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

STOP

Broken or missing parts?

Need help with assembly?

Our Illinois based customer service team is ready to help with any problems or questions you may have.

Please give us a call (Toll Free) at 1-800-468-6447, or email us at parts@convenience-concepts.com.

Normal hours of Operation: M-F* 8am-4pm CST.

*Excludes Holidays

This product's warranty is only valid through authorized dealers.

166399

Need help?

Do you have a question about the MISSION 166399 and is the answer not in the manual?

Page 1 MISSION GLASS CONSOLE TABLE 166399 ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish . Feel confident that this will be a fun and rewarding project .
Page 2 Hardware List Polishing Cloth Non-Slip Disk Screw Allen Wrench Eyelet Screw Anchor (1pc) (12pcs) (20pcs) (1pc) (2pcs) (2pcs) Panel List Rail (3pcs) Frame (2pcs) Glass (2pcs) Front Rail (1pc) *Please count and verify all parts before assembly .* Exploded View Page 2 of 4...
Page 3 Step 1 *Assemble unit on carpet or another soft surface. 1.Connect frames (2) together by sliding them into rails (3) and front rail (4) as shown. 2. Secure rails ( 3 ) and front rail (4) to frames ( 2 ) as shown using screws (A) and allen wrench (B) .
Page 4 Step 3 1. Retighten all screws. 2. Using a slight angle, carefully insert glass ( 1 ) into unit. Step 4 1.Drill holes slightly smaller than anchors (G)into drywall and gently tap anchors into holes. 2.Insert eyelet screws (F) into anchors and fasten unit to wall using cable ties (E). Page 4 of 4...

Mission 166399glcro