Thank you for purchasing our Renlicon Fire Pit. Please read the following information carefully before starting assembly. This instruction sheet provides the necessary information for the assembly of the Renlicon Fire Pit. If you find something we missed or require any additional information, please feel free to contact our Customer Service team at (530) 893-5244.
Page 3 of 7 SAFETY NOTES Please read assembly instructions and safety notes before using your Renlicon Fire Pit. • Never use indoors. • Do not move fire pit once fire is lit. • Wait an adequate amount of time for fire pit to cool down before disassembling and transporting.
Page 4 of 7 PARTS LIST/DIAGRAM Before beginning assembly, verify all parts listed below are included in the installation kit. If there are any missing or damaged parts, please contact Renlicon at (530) 893-5244. Carabinier Rope Handle Side Panel Vertical Support...
Note: You may find it easier to not connect the vertical side panels and carry them separately. The supplied rope handle is to only be used for transport of the the Renlicon Fire Pit. The materials of the handle are not fire resisant so be sure to remove handle from fire pit area before fire is lit.
1. Start with one vertical panel and attach both of the side panels 2. Attach the second vertical panel 3. Finish by placing the bottom panel inside the pit. 1445 Fortress Street, Chico CA 95973 ● (530) 893-5244 www.Renlicon.com 8/5/2022 REV A...
• Dutchoven Pot Hanger • Fire Stoker • Fire Starter For any suggestions on what you would like to see: Send us an email at info@renlicon.com or call us at (530) 893-5244 1445 Fortress Street, Chico CA 95973 ● (530) 893-5244 www.Renlicon.com 8/5/2022...
Need help?
Do you have a question about the 000-RN-17282 and is the answer not in the manual?
Questions and answers