Eglo 96457 Instruction Manual

96457/96458
Infrared Motion Sensor
Instruction Manual
5
6
96457_96458_bda.indd 1
96457/96458
1
4
3
2
Welcome to use 96457/96458 infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It combines automation,
convenience, safety, energy-efficience and practical functions. It utilizes the infrared energy from
humans as control-signal source and it can start the load at once when one enters the detection
field. It can identify day and night automatically. It is easy to install and used widely.
SPECIFICATION:
Power Source: 220-240V/AC
Power Frequency: 50Hz
Ambient Light: <3-2000LUX (adjustable)
Time Delay: Min.10sec±3sec Working Humidity: <93%RH
Max.7min±2min Power Consumption: approx 0.5W
Rated Load: Max.1200W Installation Height: 1.8-2.5m
300W Detection Moving Speed: 0.6-1.5m/s
FUNCTION:
• Can identify day and night: The consumer can adjust working state in different ambient light. It
can work in the daytime and at night when it is adjusted on the "sun" position (max). It can work
in the ambient light less than 3LUX when it is adjusted on the "3" position (min). As for the ad-
justment pattern, please refer to the testing pattern.
• Time-Delay is added continually: When it receives the second induction signals within the first
induction, it will restart to time from that moment.
Good sensitivity
INSTALLATION ADVICE:
Since the detector responds to changes in temperature, avoid the following situations:
• Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
• Avoid mounting the detector near heat sources, such as heating vents, air conditioning units,
light etc.
• Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall
plants etc.
Detection Range: 180°
Detection Distance: 12m max(<24C°)
Working Temperature: -20~+40C°
Poor sensitivity
23.12.2016 08:56:26