Download Print this page

Advertisement

Quick Links

Remli
W-RM01
Thank you for purchasing the Ambientec Remli.
Please read these instructions thoroughly before using 
the product.
Contents
1
Safety Precautions
2
Package Contents and Nomenclature
3
Before Using the Product
4
Operation
5
Protection against Dust and Water
6
Care and Maintenance
7
Product Specifications
8
Disposing of This Product
Ambientec Corporation  
https://ambientec.co.jp/
1  Safety Precautions
● To use the product correctly and safely, be sure to read the 
Safety Precautions before use. The Safety Precautions include 
critical information for safety. Be sure to heed them.
● The following symbols indicate the degree of risk or damage 
that may result if the information given after each symbol is 
ignored and the product is used improperly.
DANGER
WARNING
CAUTION
If the product is used improperly and any of the following 
DANGER, WARNING, or CAUTION information is ignored, there is 
potential for fire, heat generation, damage, or leakage that may 
cause burns, injury, or loss of sight.
Do not put the product in a fire or heat it in an oven.
Do not expose the product to high temperatures or leave it 
in a place where it is subject to direct sunlight.
Do not place the product within reach of infants and children.
Do not open or modify the product.
Do not apply an impact to the product by dropping it,throwing 
it,etc.
Do not look directly at the LED light source when it is lit.
Do not charge the product in wet and humid environments such 
as outdoors or in the bathroom.
Never loosen or remove the base of the main body except when 
you are going to dispose of the rechargeable lithium-ion battery.
Disconnect the product immediately if you notice smoke or 
smell something burning.
Do not place the product in an area exposed to direct 
sunlight to prevent it from being discolored and deformed.
Do not short-circuit the recharging terminal of the main body 
or changer stand with a metal pin or other metallic object.
Do not cover the product with cloth, paper, or any other 
easily flammable material.
Keep water and other liquids away from the AC adapter and 
charger stand and do not use them while they are wet. Also 
do not plug or unplug the AC adapter and other connectors 
with a wet hand.
Do not use the USB cable if it is damaged.
Do not swing or throw the main body.
Always supply power within the rated voltage range (100 to 
240V AC) of the AC adapter.
ML039P013-00
Indicates an imminently hazardous situation which, 
if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if 
not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, 
if not avoided, may result in minor/moderate 
injury or equipment damage.
Indicates "prohibited" actions that must not be performed.
Indicates "compulsory" actions that must be performed.
DANGER
WARNING

Advertisement

loading
Need help?

Need help?

Do you have a question about the Remli and is the answer not in the manual?

Questions and answers

Summary of Contents for Ambientec Remli

  • Page 1 Indicates an imminently hazardous situation which,  DANGER if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if  WARNING not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which,  CAUTION if not avoided, may result in minor/moderate  injury or equipment damage. If the product is used improperly and any of the following  DANGER, WARNING, or CAUTION information is ignored, there is  potential for fire, heat generation, damage, or leakage that may  cause burns, injury, or loss of sight. Remli Indicates “prohibited” actions that must not be performed. W-RM01 Indicates “compulsory” actions that must be performed. DANGER Do not put the product in a fire or heat it in an oven. Do not expose the product to high temperatures or leave it  in a place where it is subject to direct sunlight. Thank you for purchasing the Ambientec Remli. Please read these instructions thoroughly before using  Do not place the product within reach of infants and children. the product. Do not open or modify the product. Do not apply an impact to the product by dropping it,throwing  Contents it,etc.
  • Page 2  (pointedby ▲) ON/OFF  dimmer button (4 places on the base's  inner circumference) [2]Error warning If the product detects heat generation from the battery and  control circuit board or an abnormality in the power supply, the  < Side > protection function may be activated, in which case the charge  Recharging  status indicator lamps start blinking and charging is not possible.  terminal Should this be the case, remove the main body from the charger  stand, wait for a while, and then replace the main body on the  charger stand to resume charging. <Bottom> DANGER Do not look directly at the LED  light source when it is illuminated. Main body bottom (enlarged) Recharging terminal Can only recharge the  product provided with  two red rings around the  USB connection  recharging terminal on the  terminal (Type-C) bottom of its main body. * Thanks to widespread use of mobile devices, most people today already possess a  USB-compatible AC adapter. So it is not provided with this product in order to  reduce environmental impact. When using this product, have a DC5V/2A (or 2A or  higher) USB-compatible AC adapter handy. Ambientec's optional AC adapter  (Product Code: AMB-AC02) can also be used.
  • Page 3 4 Operation 5  Protection against Dust and Water [1]Battery Power mode for cordless use ● The main body is both dustproof and  ●The main body goes out when it is placed on the charger stand  water-resistant (IP66* equivalent) but  and lights up when removed from the stand. should not be used underwater. Do not put  it in a bathtub or other water container. * Indicates protection from dust and high-pressure  water jets from any direction. Goes out ● The charger stand is not waterproof. Make sure it doesn't get wet. LED automatically turns on Lights up Goes out <Operation using the ON/OFF dimmer button> ● The brightness of the Battery Power mode can be adjusted in four steps. Each time the ON/OFF dimmer button on the bottom of  the main unit is pressed, the brightness level changes in the  following order: OFF →LOW → MID→ HIGH→EX-HIGH→ OFF,  Be sure to adhere to the following when using the product  and so on. in a bathroom or similar environment CAUTION Do not leave the product for a long time in a  high-temperature, high-humidity bathroom or sauna. Do not place the product on a poorly drained  bathroom floor or similar environment. ON/OFF dimmer button [2]  USB Power mode for lighting up the main body when  it has been charged on the charger stand 6   Care and Maintenance <Switching from the Battery Power mode> To keep this product in optimal condition, please follow these  ● Keep the ON/OFF dimmer button pressed until the LED on the ...
  • Page 4 7  Product Specifications 8  Disposing of This Product This product uses a rechargeable lithium-ion battery that contains  Product name Remli recyclable rare earth metals. Before disposing of the product,  W-RM01 remove the battery and dispose of it according to local regulations. Product code Main body / Main Concrete, pumice, glass, ceramics, etc. exterior 1. Be sure to keep the light on until it goes out. This will allow the  materials Main body/ ABS, aluminum, acrylic resin, silicone rubber battery to discharge completely. interior Zinc alloy, ABS, silicone rubber Charger stand 2. Insert the tips of L-shaped C-ring pliers or a similar tool into the  Surface Plastering finish Main body two  recesses  on  the  bottom  of  the  base  and  press  down  (①).  treatment Baked paintng (Black)

This manual is also suitable for:

W-rm01