Download Print this page

GuaiGLong B0CCJ79XY4 Product Manual

12v 120ah lifepo4 battery

Download this manual

GuaiGLong

12V 120AH LiFePO4 Battery Product guides and documents

Technical Parameters

1. Battery cell type:Lithium iron phosphate battery(LiFePO4)

2. Maximum power: 1280W(Build in 100A BMS,Optional Bluetooth BMS)

3. Rated capacity: 12V 120AH

4. Weight: about 19.4 Pounds

5. Size: L11.61*W10.43*H5.59in

6. Nominal voltage: 12.8V

7. Operating voltage range: 10V~ 14.6V

8. Maximum charging current: 20A

9. Charging voltage: 14.6V

10. Continuous discharge current: 100A

11. Instantaneous discharge current: ≤100A

12. Operating environment: 0 ~ 45℃(charging), -20 ~ 60℃(discharging)

13. Battery storage period: 90% power (6 months)

Interface Introduction

1.Waterproof plug (LD20,Output:12v)

This output port is for outputting 12V power supply.

This port has a maximum current of 20A and is used for low-power devices, such as sonar(fish

detectors), speakers,LED lights,etc.

2.Anderson plug (50A)

This port has a maximum current of 50A and is used for devices with a power of less than

600W, such as low-power electric motors, low-power engines, etc.

Need help?

Do you have a question about the B0CCJ79XY4 and is the answer not in the manual?

Page 1 GuaiGLong 12V 120AH LiFePO4 Battery Product guides and documents Technical Parameters 1. Battery cell type:Lithium iron phosphate battery(LiFePO4) 2. Maximum power: 1280W(Build in 100A BMS,Optional Bluetooth BMS) 3. Rated capacity: 12V 120AH 4. Weight: about 19.4 Pounds 5. Size: L11.61*W10.43*H5.59in 6.
Page 2 3.Terminal(M8) It is used to connect high-power devices (≤100A,MAX.1280W), such as electric motors, engines, trolling motors, inverters, and other high-power devices. 4.Charging Port GX20(3-pin, 1 positive pole,3 negative poles) It is used to connect a charger for charging and can also discharge,with a maximum current of 12A.
Page 3 Please note: The percentage of electricity displayed on this display is inaccurate. When using it, you need to estimate the remaining electricity according to the voltage. The power of 12V LiFePO4 battery is concentrated between 12.2v-13.2v. When the voltage is lower than 10.4V, BMS will soon cut off the battery output.