Further information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 24 1.1 General information.... 4 9.1 Automatic programmes... 24 1.2 Intended use...... 4 9.2 Timed programmes .... 25 1.3 Restriction on user group.. 4 10 Accessories...... 27 1.4 Safe installation ......
Page 3
15 Cleaning and servicing ... 33 15.1 Tips on cleaning and care .. 33 15.2 Base unit ....... 33 15.3 Moisture sensor..... 36 16 Troubleshooting...... 37 17 Transportation, storage and disposal ........ 41 17.1 Preparing the appliance for transportation ...... 41 17.2 Disposing of old appliance ... 41 18 Customer Service.... 42 18.1 Product number (E-Nr.) and production number (FD)..
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. ▶ Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door.
Page 10
en Safety ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories.
Preventing material damage en Clean the appliance with nothing ▶ Preventing material damage 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact Preventing material damage ATTENTION! with the appliance.
en Installation and connection Check the appliance for visible After drying, clean the fluff filter damage. → Page 29. Open the door. a If the fluff filter is dirty, this reduces Remove any accessories from the the air flow in the appliance, ex- drum.
Installation and connection en If residual water in the appliance Installation loca- Requirements freezes, this may cause damage to tion the appliance. In a washer-dryer Only use the ori- Do not install or operate this appli- ▶ stack ginal connection ance anywhere that is liable to ex- set from the perience frost or outdoors.
Page 14
en Installation and connection container. Use the water drain hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Note ¡ Operate this appliance using the water outlet hose provided. → "Connecting the water drain hose", Page 14 If you connect the water outlet...
Page 15
Installation and connection en Push the water drain hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
en Installation and connection bow and secure it using fixing ma- terial. Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 28 Display → Page 19 Buttons → Page 21...
Display en Display 6 Display The display shows the current settings, options or relevant information. Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 1:25 The timed programme is set. → "Timed programmes", Page 25 Program end time → "Buttons", Page 22 ¡...
Page 20
en Display Display Description The cooling process cools the laundry for a few minutes while the drum is rotating, in order to avoid damage to the laundry. The cooling process can be cancelled by open- ing the door. Note: Do not change the set programme. Drying Programme status Dryness level: Iron Dry...
Page 21
Buttons en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡...
en Buttons Button Selection Description Finish in Up to 24 hours Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the pro- gramme duration is dis- played. Program Duration Multiple selection Set the programme dura- tion for timed pro-...
Dryness level en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level Dryness level defines how dry or damp your laundry is after the programme ends. Programme Laundry Drying result Cottons Multi-layered, thick laundry The laundry is dry. Cupboard Dry that does not dry readily.
en Programmes Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- Programmes gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) Easy Care Iron Dry Dry items made of synthetic materials or blended fabrics. The dryness level is not defined in this programme. → "Dryness level", Page 23 Mixed Load Dry items made of cotton and synthetics. Delicates Dry delicate items made of satin, synthet- ics or blended fabrics.
Page 26
en Programmes Programme Description Max. load (kg) Remove laundry once the programme has ended and allow it to dry. Timed Program Cold Fluff/loosen all fabric types except for wool and silk. This programme is suitable for fluffing dry laundry only. Also suitable for freshening up or airing dry clothing that has hardly been worn.
Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 42. Order number Connection kit To save space, stack the WTZ20410 appliance on a suitable washing machine of the same width and depth and that is from the...
en Laundry Turn the programme selector and Laundry 11 Laundry set the required programme. → "Programmes", Page 24 Laundry If required, adjust the programme 11.1 Preparing the laundry settings. → "Adjusting the programme set- ATTENTION! tings", Page 28 Objects remaining in the laundry may damage the laundry and the drum. 12.3 Adjusting the pro- Remove all items from any pock- ▶...
Basic operation en a The display shows the programme Close the door. duration or the programme end Press Start/Reload . time. a After the programme has ended, 12.8 Cancelling the pro- the display shows: "End" . gramme Note: If "Hot" appears, the appli- Press Start/Reload .
Page 30
en Basic operation Remove the fluff from the door. Open the fluff filter. Remove the fluff filter. Remove the fluff. Remove the fluff from the recess. Clean the fluff filter thoroughly un- der warm, running water and then dry it off. Ensure that no fluff falls into the air channel.
Basic operation en Close the fluff filter. Emptying the condensation container If the drying programme has finished or the display shows a notification while the appliance is in operation, empty the condensation container. Requirements ¡ The display shows the following after drying: "End" ¡...
en Childproof lock So that the programme currently Inserting the condensation running is not cancelled, the pro- container gramme selector must be set to Push the condensation container ▶ the initial programme. in as far as it will go. goes out in the display. Basic settings 14 Basic settings You can configure the basic settings...
Cleaning and servicing en Set the minimum installation Cleaning and servicing 15 Cleaning and servi- protection of the appliance to cing 10 A (LO) or 13 A (HI). Note: The values for the en- To keep your appliance working effi- Cleaning and servicing ergy label were determined ciently for a long time, it is important with a minimum installation to clean and maintain it carefully.
Page 34
en Cleaning and servicing Open the maintenance flap. Cleaning the base unit You can remove any visible dirt in the base unit. ATTENTION! Heavy or sharp objects may damage the heat exchanger. Do not use hard, sharp or rough ▶ objects for cleaning. Open the base unit → Page 33.
Page 35
Cleaning and servicing en Clean the heat exchanger from all Closing the base unit sides under running water and dry Requirement: The base unit is open. → "Opening the base unit", Page 33 Insert the heat exchanger cover by the handle. Clean the opening with a soft, damp cloth.
en Cleaning and servicing 15.3 Moisture sensor The moisture sensor in this appliance measures how damp the laundry is during the drying cycle. The appli- ance changes the duration of the automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor.
Troubleshooting en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 38
en Troubleshooting Fault Cause and troubleshooting Creasing. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable programme for the type of fabric. Set the suitable programme for the type of fabric.
Page 39
Troubleshooting en Fault Cause and troubleshooting The programme does Childproof lock is activated. not start. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 32 Start/Reload has not been pressed. Press Start/Reload . ▶ No programme set. → "Setting a programme", Page 28. → "Starting the programme", Page 28. The length of the pro- The programme operation is optimised electronically.
Page 40
en Troubleshooting Fault Cause and troubleshooting Water is leaking from Ensure that the water drain hose is connected cor- ▶ the appliance. rectly. → "Connecting the water drain hose", Page 14 The laundry is too Unsuitable programme for the type of fabric. damp. Set a timed programme for the subsequent drying.
Transportation, storage and disposal en 17.2 Disposing of old appli- Transportation, storage and disposal 17 Transportation, stor- ance age and disposal Valuable raw materials can be re- Transportation, storage and disposal used by recycling. 17.1 Preparing the appliance for transportation WARNING Risk of harm to health! Tip: The appliance may contain re- Children can lock themselves in the sidual water, which may drip out of it...
en Customer Service Customer Service 18 Customer Service Function-relevant genuine spare parts Customer Service according to the corresponding Eco- design Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Eco- nomic Area.
Consumption values en Consumption values 19 Consumption values The actual values may deviate from Consumption values Cottons Cupboard Dry programme (denoted by the arrow the indicated values depending on symbol) is suitable for drying cotton the type of fabric, composition of laundry with a normal dampness laundry to be dried, residual moisture level, and is the most efficient pro- in the fabric, set degree of dryness,...
Page 44
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons Iron Dry 12.0 1000 02:10 / 3.78 / 01:53 3.69 Cottons Iron Dry 12.0 1000 01:15 /...
Technical data en You can find more information about your model online at https:// eprel.ec.europa.eu/ . This web ad- dress is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the charac- ters before the slash in the product number (E-Nr.) on the rating plate.
Page 48
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the WTN85203IL and is the answer not in the manual?
Questions and answers