Advertisement
Quick Links
Solid brick wall, load-bearing wall, fired hollow brick wall, wood board wall
thickened insulation wall!
gypsum board walls and thin plywood walls...! .
1.For solid brick walls,
load-bearing walls, and fired
hollow brick walls, we are
equipped with 10mm wall fittings
2.If it is a wooden wall (the
thickness of the board needs to
be at least 15 mm), please use
spare screws.
Installation wall requirements
It is not recommended to install
15mm
HX-1010/1210-1
Advertisement
Summary of Contents for Bixiaomei HXD-US
- Page 1 Installation wall requirements Solid brick wall, load-bearing wall, fired hollow brick wall, wood board wall It is not recommended to install thickened insulation wall! gypsum board walls and thin plywood walls...! . 1.For solid brick walls, load-bearing walls, and fired hollow brick walls, we are equipped with 10mm wall fittings 2.If it is a wooden wall (the...
- Page 3 Adjust left Adjust Height Adjust front...
- Page 4 1013 HX-1010/1210-4...
- Page 5 1013 1007 ⑦ 1007 1019 ③ HX-1010/1210-5...
- Page 6 1019 ④ 1007 ⑤ 1003 1003 ① HX-1010/1210-6...
- Page 7 ② ③ 1007 ④ ① ⑤ 1003 1003 ⑥ ⑦ HX-1010/1210-7...
- Page 8 1008 1008 This screw adjusts the left and right gap of the door to ensure that the left and right gap of the door is even. HX-1010/1210-8...
- Page 9 The screw in this position can adjust the upper and lower gap of the door to ensure that the upper and lower gap of the door is even. This screw adjusts the front and back gap of the door to ensure smooth opening and closing of the door.
- Page 10 Locate the hole on the wall of the furniture according to the position of the spirit level 1002 Make 10mm expansion holes on the wall HX-1010/1210-10...
- Page 11 1002 1009 HX-1010/1210-11...
Need help?
Do you have a question about the HXD-US and is the answer not in the manual?
Questions and answers