Yamaha GSP100 Operation Manual

YAMAHA
GUITAR SOUND PROCESSOR
GSP IQQ
GAIN/MASTER
STONE CONTROL
Operation Manual
GAIN
fo o
INPUT DIST UMB} pass
Mope
TREBLE
This equipment generates and uses radio fre-
quency energy and if not installed and used pro-
perly, that is, in strict accordance with the
manufacturer's instructions, may cause inter-
ference to radio and television reception. It has
been type tested and found to comply with the
limits for a Class B computing device in accord-
ance with the specifications in Subpart J of Part
16 of FCC Rules, which are designed to provide
reasonable protection against such inteference in
a residential installation. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause interference to radio or television reception
which can be determined by turning the equip-
ment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
FCC CERTIFICATION (USA) for GSP100
Reorient the receiving antenna.
Relocate the computer with respect to the
receiver.
Move the computer away from the receiver.
Plug the computer into a different outlet so
that computer and receiver are on different
branch circuits.
If necessary, the user should consult the
dealer or an experienced radio/television techni-
cian for additional suggestions. The user may find
the following booklet prepared by the Federal
Communicatians Commission helpful:
"How to identify and Resolve Radio-TV
interference Problems''.
This booklet is available from the U.S.
Government Printing Office, Washington, DC
20402, Stock No. 004-000-00345-4.
CANADA
THIS APPARATUS COMPLIES WITH THE 'CLASS B" LIMITS FOR RADIO NOISE EMISSIONS SET
OUT IN RADIO INTERFERENCE REGULATIONS.
CET APPAREIL EST CONFORME AUX NORMES "CLASSE B'', POUR BRUITS RADIOELECTRIQUES,
TEL QUE SPECIFIER DANS LE REGLEMENT SUR LE BROUILLAGE RADIOELECTRIQUE.