Trailer Valet RVR3 Quick Start Manual

Check that you have all your parts and accessories.
RVR9 UNIT
ROTATION PIN STOW PIN
BRACKET CLAMPS (2X) BASE TOWER
MOUNTING JOINT BRACKET
BRACKET BOLTS (4X)
REMOTE CONTROL
BATTERY CHARGER MANUAL
1.
Fit the Base Tower into the slot on
the top of the RVR and secure
SECURITY BOLT
with the four included screws.
Install the Mounting Joint on top
of the Base Tower and secure with
Rotation Pin.
SCREWS (4X)
4.
To start maneuvering,
simultaneously press
forward/backward and
right/left buttons.
IMPORTANT SAFETY INFORMATION
For information and assistance, please visit our support page at TrailerValet.com or give us a call at (844) 846-9344.
Scan the QR code to the right for detailed safety and usage information.
TRAILER VALET RVR5 & RVR9 w/ MOUNT BRACKET
Quick Start Guide
NOTE: Make sure that unit is fully charged. First charge at least 6-8 hrs.
8"
2.
Check trailer height and ensure
installation is on a flat surface.
Install the Mounting Bracket to
the trailer frame. (at least 8
inches of clearance)
5.
Use the remote to move the
unit towards the bracket
socket.
Rev 7.01.24
FRONT OF RVR REMOTE CONTROL
3.
Turn on RVR by pressing the
start/stop button located on the
front of the RVR. Turn on the remote
control by pushing the forward
button once (hold for a few seconds)
6.
Install and secure the unit
utilizing the stow pin, and start
moving!