Related Manuals for Alpha420 EdiWhip 2.0
Summary of Contents for Alpha420 EdiWhip 2.0
- Page 1 Decarb Butter Tincture Low & Slow Clean SELECT time Temp START/ STOP INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
EDIOVEN FEATURES HOW TO DECARB HOW TO INFUSE BUTTER TINCTURE TINCTURE COLD SLOW & LOW FAQS / TIPS CLEANING SAFETY WARRANTY QUESTION OR ISSUES Scan the QR Code below for How to Videos or Product Support or email us at Support@Alpha420.com... - Page 3 EDIWHIP 2.0 DIGITAL CONTROL PANEL Decarb Butter Tincture Low & Slow Clean SELECT time Temp START/ STOP Butter Decarb Preset Functions Tincture Low & Slow Clean Select to change Presets SELECT time Temp START/ STOP Start/Stop Adjust Temperature Adjust Time...
-
Page 4: How To Decarb
For THC you want the plant material at 240F for 1 hour. For CBD you want the plant material at 270F for 1 hour. The EdiWhip 2.0 Decarb preset is set at 240F for 1:20. Using the purple Decarb lid it takes up to 20 minutes for... - Page 5 The plant material should be completely dry, otherwise moisture will condense on the canister and drip back onto your plant material. Let the EdiWhip 2.0 cool down before opening the lid. The hotter air is more fragrant. Can I increase the temp to decarb faster? Higher temps run the risk of damaging the terpenes which are the trace oral oils.
- Page 6 DECARB INSTRUCTIONS POWER LID AND HOLE PLUG Insert the silicone plug into the vent Connect the power cord to a 120V hole on the lid. Place the lid on the power outlet in North America. For canister and align the tab with the other countries, you need a handle.
- Page 7 Do I need to melt my butter or oil? Yes. If using butter or coconut oil, make sure it is melted rst before putting into the EdiWhip 2.0 canister. How do I store my infusions? UV/sunlight light can degrade your infused base. Make sure to store in a cool dark place (refrigerator is OK).
-
Page 8: Butter
INFUSION INSTRUCTIONS Butter Decarb Tincture Low & Slow Clean SELECT time Temp START/ STOP Infusion Buttons Preset Chart Temp Hours Butter 160F 02:00 Coconut Oil 160F 1:30 Avocado / Olive Oil 160F 1:30 MCT Oil 160F 1:30 Propylene Glycol (PG) 130 F 03:00 Tincture (Alcohol) - Page 9 BUTTER INFUSION INSTRUCTIONS For best results butter should be melted before infusing. MINIMUM AND MAXIMUMS: Amount of Butter Amount of plant material Minimum: 2.5 sticks / 1.25 cups (300mL) Minimum: 1/8 oz (3.5 grams) Maximum: 7 sticks / 3.5 cups (830mL) Maximum: 2 oz (56 grams) COMMON RATIOS: A common ratio to use for infusion is...
- Page 10 BUTTER INFUSION INSTRUCTIONS INFUSION PRESET: Press the select button until the Butter icon starts ashing. Default butter setting: 160°F for 2 hours. Adjust time or temperature using the Up/Down arrow buttons if desired. STARTING THE INFUSION: Press Start to begin the infusion cycle. Once started, time or temperature adjustments are not allowed.
- Page 11 OIL INFUSION INSTRUCTIONS For best results use cold-pressed coconut oil. Soybean, Canola, Corn, and extra virgin Olive Oil are not recommended. MINIMUM AND MAXIMUMS: Amount of Oil Amount of plant material Minimum: 1.25 cups (300mL) Minimum: 1/8 oz (3.5 grams) Maximum: 3.5 cups (830mL) Maximum: 2 oz (56 grams) COMMON RATIOS:...
- Page 12 OIL INFUSION INSTRUCTIONS STARTING THE INFUSION: Press Start to begin the infusion cycle. Once started, time or temperature adjustments are not allowed. COOL DOWN: After the cycle nishes, allow 15-20 minutes for the contents to cool down. STRAINING THE MIXTURE: Place the strainer basket into a large mixing bowl.
- Page 13 TINCTURE - ALCOHOL OR PROPYLENE GLYCOL (PG) For best results use food grade alcohol with a proof of 151 or higher. For vape juice use PG instead of VG. MINIMUM AND MAXIMUMS: Amount of Alcohol or PG Amount of plant material Minimum: 1.25 cups (300mL) Minimum: 1/8 oz (3.5 grams) Maximum: 3.5 cups (830mL)
- Page 14 TINCTURE - ALCOHOL OR PROPYLENE GLYCOL (PG) STARTING THE INFUSION: Press Start to begin the infusion cycle. Once started, time or temperature adjustments are not allowed. COOL DOWN: After the cycle nishes, allow 15-20 minutes for the contents to cool down. STRAINING THE MIXTURE: Place the strainer basket into a large mixing bowl.
- Page 15 Tincture - Cold Alcohol Infusion This method is designed to quickly and e ective extract the essen- tial oils without using heat. Alcohol and plant material must be placed in the freezer for 24 hours before infusing. MINIMUM AND MAXIMUMS: Amount of Alcohol Amount of plant material Minimum: 1.25 cups (300mL)
- Page 16 Tincture - Cold Alcohol Infusion STARTING THE INFUSION: Press Start to begin the infusion cycle. Once started, time or temperature adjustments are not allowed. STRAINING THE MIXTURE: Once nished, immediately strain the mixture to avoid releasing chlorophyll. The resulting alcohol tincture should have a golden vs. a brownish color.
- Page 17 1/2 cup (240ml) of liquid base PREPARATION: Remove the lid and add liquid base, decarbed plant material, and lecithin (if required) to the EdiWhip 2.0 canister. LID PLACEMENT: Place the lid on the canister and align the tab with the handle. Ensure the lid is fully on and aligned correctly to avoid LId error on the display.
- Page 18 SLOW & LOW INFUSION INSTRUCTIONS STARTING THE INFUSION: Press Start to begin the infusion cycle. Once started, time or temperature adjustments are not allowed. COOL DOWN: After the cycle nishes, allow 5 - 10 minutes for the contents to cool down. STRAINING THE MIXTURE: Place the strainer basket into a large mixing bowl.
- Page 19 Press Start / Stop button to begin the cycle. Empty once nished and dry with a clean cloth. EdiWhip 2.0 cleaning by hand - Use warm soapy water and and a scrub brush or cloth to clean the inside of the canister.
-
Page 20: Safety
Keep the power cable away from HOT surfaces to avoid damage. If anything unusual happens, unplug power supply. Do not use if any part is broken, chipped, loose or cracked. Contact us immediately at Support@Alpha420.com for a replacement. Where to use? In a well-ventilated area inside, not outdoors. -
Page 21: Warranty
WARRANTY The Alpha420 EdiWhip 2.0 is guaranteed to be free from manufacturer defects for 1 year from the date of original purchase. If there are problems due to manufacturing, we will replace or repair the unit. This warranty only covers the original purchaser and does not cover problems resulting from misuse, neglect, use for commercial purposes, any use not conforming to manual directions. - Page 22 THANK YOU FOR YOUR PURCHASE! Questions & Comments? Support@Alpha420.com Alpha420 A420-EDWP-20 Copyright 2023 All domestic and international rights reserved. Designed in Detroit. Made in China. SCAN TO JOIN THE PACK, SEE RECIPES, & MORE...
Need help?
Do you have a question about the EdiWhip 2.0 and is the answer not in the manual?
Questions and answers
When decarbing on the 420 ediwhip, how do I check the temperature. Is it the current temp shown when I hit a temp button?
The Alpha420 EdiWhip 2.0 automatically controls the temperature for decarbing. For THC, it heats the plant material to 240°F for 1 hour, and for CBD, it heats to 270°F for 1 hour. There is no mention of a manual temperature check in the provided information.
This answer is automatically generated