Related Manuals for MP Filtri FHM065
Summary of Contents for MP Filtri FHM065
- Page 1 HIGH PRESSURE FILTERS INSTALLATION, SERVICE AND MAINTENANCE MANUAL AND SAFETY INSTRUCTIONS INSTRUCTIONS FHM065 FHM065 PASSION PERFORM...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Description General warnings Tools Handling Dimensional drawings Installation Commissioning Standard maintenance Filter element replacement Special maintenance Clogging indicator (or plug) replacement Seals replacement Instructions for use in explosive atmospheres Regulations Spare parts list Ordering code 13.1 Filter / Housing / Bowl 13.2 Filter element... -
Page 4: Description
- Connect the filter with an anti-loosening system and regularly check the condition of the connection - The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts are used - Warranty is only effective if MP Filtri original spare parts are used. -
Page 5: Handling
FHM065 Handling - The unit is shipped in a cardboard box with dimensions depending on the order - The handling must be carried out in accordance with the laws in force in the country of use of the product - Handle the product with care, avoid impacts - Store in a dry and frost-free room - The unit should be stored in a suitable location away from the production area when not in use. -
Page 6: Dimensional Drawings
Dimensional drawings FHM065 Filter length [mm] Recommended Ø68 clearance space for maintenance Connection for differential indicator T2 plug not included Nr. 4 holes High Pressure filters... -
Page 7: Installation
FHM065 Parts identification Parts identification FHM050-065 Item Description Clogging indicator connection Installation Identification plate Clogging indicator connection Identification plate - Check that the system working pressure does not exceed the maximum working pressure of the filter. The maximum working pressure of the filter is shown on the identification plate... -
Page 8: Standard Maintenance
Standard maintenance FILTER ELEMENT REPLACEMENT The clogging indicator monitors the conditions of the filter element. The alarm signal shown by the differential indicator during the normal working conditions (pressure, temperatures …) means that the filter element needs to be replaced. - Check the availability of the right spare filter element by comparing the part number shown on the element with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3... -
Page 9: Special Maintenance
FHM065 Special maintenance CLOGGING INDICATOR (OR PLUG) REPLACEMENT Filtro Filtro Filtro Filtro - Check the availability of the right spare parts by comparing the part numbers shown on them with that shown Smontaggio Smontaggio Smontaggio Smontaggio Svuotamento Svuotamento Svuotamento Svuotam... -
Page 10: Seals Replacement
SEALS REPLACEMENT Filtro Smontaggio FHM050 completo contenitore Smontaggio Montaggio Drenaggio Smontaggio Svuotamento Smontaggio Montaggio Montaggio tappo di drenaggio olio filtro tappo di drenaggio contenitore contenitore elemento elemento contenitore Montaggio - Check the availability of the right spare parts by comparing the part numbers shown on them tappo di drenaggio with that shown on the filter name plate or spare parts list - For the disassembly and the assembly of the parts, please refer to the tools table in paragraph 3... - Page 11 FHM065 ntaggio Smontaggio Svuotamento Svuotamento Smontaggio Smontaggio Montaggio Montaggio Montaggio Montaggio - (Fig. 16) Replace the O-rings of the manifold enitore contenitore contenitore contenitore elemento elemento elemento elemento contenitore contenitore montaggio Svuotamento Smontaggio Montaggio Montaggio ontenitore - (Fig. 17) Unscrew the indicator body...
-
Page 12: Instructions For Use In Explosive Atmospheres
MP FILTRI has carried out a voluntary certification of a part of the product range in compliance with directive 2014/34/EU, in order to guarantee an appropriate degree of safety in these particular conditions. -
Page 13: Spare Parts List
Spare parts list FHM065 FHM065 12. Spare parts list Item Quantity Description Designation / Ordering code Complete filter Housing See “Ordering Code” table Bowl Assembly Filter element Item Q.ty Description Designation / ordering code Clogging indicator Seals kit Complete filter... -
Page 14: Ordering Code
6 µm Inorganic microfi ber 10 µm Inorganic microfi ber 16 µm Inorganic microfi ber 25 µm Wire mesh 25 µm Valves Element ∆p 20 bar • • 210 bar • • Execution MP Filtri standard Customized High Pressure fi lters... -
Page 15: Filter Element
25 µm M25 Wire mesh 25 µm Seals Element ∆p 20 bar 210 bar Execution MP Filtri standard Customized CLOGGING INDICATORS Electrical differential indicator Electrical differential indicator Electrical / visual differential indicator Electrical / visual differential indicator Electrical differential indicator... -
Page 16: Troubleshooting
14. Troubleshooting 14.1 MISUSE OF THE PRODUCT This product should be connected to a hydraulic line; this must not exceed upper pressure limit of the product. his product should follow all standard operating procedures previously set at the operating location as well as the procedures required by the manufacturer. - Page 17 NOTES High Pressure filters...
- Page 18 NOTES High Pressure filters...
- Page 19 All data, details and words contained in this publication are provided for use by technically qualifi ed personnel at their discretion, without warranty of any kind. MP Filtri reserves the right to make modifi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
- Page 20 WORLDWIDE NETWORK CANADA CHINA FRANCE GERMANY INDIA SINGAPORE UNITED ARAB EMIRATES UNITED KINGDOM ITALY PASSION PERFORM mp ltri.com...
Need help?
Do you have a question about the FHM065 and is the answer not in the manual?
Questions and answers