Avatar GOGGLES L Quick Start Manual

AVATAR GOGGLES L
Introduction
This product is a wireless image transmission head-mounted display device,
compatible with Avatar HD System series air unit products, and can achieve
long-distance, low-latency, high-definition wireless image transmission. In the
document, the terms VTX, Air unit, etc. refer to Avatar image transmission
camera products. In the document, the terms VRX, Goggles, etc. refer to
Avatar image transmission display products.
1: Built-in Antenna
2: Link Button
(Short press to enter the linking state, long press for 8 seconds
to enter the upgrade state)
3: Record Button
(Press to start or stop video recording)
4: Back Button
(Press to return to the previous menu or exit the current mode)
5: 5D Button
(Toggle the button to scroll through the menu. Press the button
to confirm)
6: 3.5mm Port
7: Power Port
(Voltage range: 6V-25.2V, DC 5.5*2.1)
8: Heat dissipation outlet
9: Micro SD Card Slot
Linking
1. Connect the VTX and the power of the Goggles.
2. Press the link button of the VTX and Goggles respectively (as shown in the
picture), when the VTX enters the pairing state The indicator light turns
red, and the Goggles end is a DI... DI... DI...
3. After the link is successful, the indicator light on the VTX turns solid green,
the beeping sound on the Goggles stops and the screen is displayed.
Upgrade
Please go to the official website to download the upgrade firmware,
AvatarLite_Gnd_X.X.X.img is the Goggles file, copy it to the SD card, be careful
not to change the file name.
1. Copy the upgrade file to the root directory of the SD card,
connect to the power supply and wait for the device to initialize
(delete the old firmware file first if there in one).
2. Press and hold the link button on the Goggles for 8 seconds, and the
Goggles automatically restart and emit a beep...beep...beeper sound.
(Do not power off during the upgrade process, the upgrade time on the
goggle is about 6 minutes)
3. After the upgrade is successful,and the beeping sound stops after the
Goggles beeps for 5 seconds.
Status indication
Goggles Buzzer Status
Link state
Upgrade firmware
Upgrade failed
(No SD card or firmware detected)
Boot failure
(Reboot or re-upgrade)
Operating channel
Make sure you fully understand and abide by local laws and regulations
before using this product. An amateur radio license may be needed in FCC
regions when using channels 1,2,6or 7, as they are amateur frequency
bands. Users who use the amateur frequency bands with a modified or
cracked version or without a license may be punished for breaking local
laws or regulations.
Precautions
1. This is a sophisticated product. Failure to operate this product in a safe
and responsible manner could result in injury or damage to the product or
other property. lt must be operated with caution and common sense and
requires some basic mechanical knowledge.
2. The transmit power of VTX and Goggles is only 10mW when the standby
mode is on.
3. There are up to eight channels for the goggles depending on the region
(FCC: eight, CE/SRRC: four, MIC: three). Each channel has a bandwidth
of 20 MHz. The public channel is 8, which is the default channel when the
equipment is powered on. The channel can be changed manually to avoid
interference from other devices.
4. It is recommended to upgrade VTX and Goggles to the latest firmware
before first use.
3.5mm Port Definition
1
Software interface
Main interface-1
25.4V 7.4V
1 2
1-VTX input voltage：
Detect VTX voltage, intelligently identify the voltage of 2, 3, 4, 6 string LiPo
batteries, alarm when a single battery is lower than 3.5V, and alarm in red
font when the voltage is too low.
2-Goggles input voltage:
Detect Goggles low battery alarm, intelligently identify the voltage of 2, 3, 4,
6 string LiPo batteries, alarm when a single battery is lower than 3.5V, red
font and buzzer alarm when the voltage is too low.
3-Real-time bit rate
Display real-time transmission code rate, two display modes of 25.0Mbps
and 50.0Mbps.
4-Time delay：
Displays the total delay from the transmission of images captured by the
VTX camera to the ground end.
5-Ranging mode：
The function of calculating the transmission distance from Goggles to VTX
according to the wireless transmission delay, the signal is interfered will
lead to error amplification。
6-Status prompt：
The text prompts information that needs attention in the current state.
7-Current channel：
Display the current setting channel, the signal grid has 5 states, 4 grids,
3 grids, 2 grids, 1 grid, and blank.
8-Goggles SD card status：
Display the status and remaining capacity of the Goggles SD card. When
recording, the red circle flashes to prompt, the status of the SD card not
detected is displayed as NO SD, and the status of the memory is full is
displayed as -.
9-VTX storage status：
Display the status and remaining capacity of the VTX storage, When
recording, the red circle flashes to prompt, the status of the storage not
detected is displayed as NO SD, and the status of the memory is full is
displayed as -.
Menu Channel-2
Channel
CH1
CH5
25.4V 7.4V
1、Display the interference situation of each channel. The signal strength is
divided into 4 grids, 3 grids, 2 grids, 1 grid, and a space. The signal display
space is occupied and cannot be selected. The white stroke is the selection
box. Press the middle button to confirm the current channel and highlight it.
2、 Channel working logic: When switching between standard bit rate and
high bit rate, the current channel will be set to CHP, and the channel needs
to be reselected. CHP is a public channel, which is easy to be interfered and
is not recommended for flight work; Auto is a channel that automatically
refreshes the signal interference situation of all channels; Refresh is the
channel of manual refresh.
3、Channel display of each country: FCC standard displays 8 channels
(CH1/2/3/4/5/6/7/P), CE/SRRC standard displays 4 channels (CH1/2/3/P),
MIC standard displays 3 channels (CH1/2/P). Only in FCC mode, the high bit
rate mode can be turned on, and the 8 channels become 4 channels CH1,
CH2, CH3, CHP.
Share Channel-3
Share
MAC:00EA1A
720P100
25.4V 7.4V
1、When the broadcast option is turned on in the menu settings
The VTX unique ID number is in brackets，Other Avatar VRX devices can
receive the local image transmission through share mode.
Menu Settings-4
Settings
Camera
Transmit Power
Frame Rate
Low Battery
25.4V 7.4V
1-Camera：
The adjustable contents of the camera are scene preset, EV value, saturation,
sharpness, white balance, rotate, ratio, 3D DNR, Shutter, and Max ISOsettings.
2-Display：
Display adjustable content is Debug, brightness, focalization mode,
custom OSD, OSD position, font upgrade, custom font, viewfinder,
viewfinder edit settings.
3-Record set：
The recording can be adjusted as VTX REC resolution, REC device,
takeoff REC, REC loop, format SD card, format VTX, Built-in EIS, REC Time,
REC Format, Color, Saturation, Sharpness.
4-Device:
The adjustable contents of the device are buzzer volume, Ranging mode,
Weak signal, Reset all, Device information, Instruction, and Switch mode.
5-Transmit Power:
The default transmit power can be 25mW, 200mW, 500mW, 700mW.
6-Resolution:
The resolution can choose 720P and 1080P.
7-Bitrate:
Standard bit rate and high bit rate can be selected to obtain different
image quality, and high bit rate can only be enabled in FCC mode.
8-Frame Rate:
The standard frame rate is equal to 60fps.
9-Standby Mode:
When in standby mode, the transmission power of VTX terminal and
Goggles terminal is 10dbm, and the current set transmission power will be
output only after exiting standby mode or turning off the standby mode
switch. Turning on the standby mode requires the air unit serial port to be
correctly connected to the flight controller. When the goggles receive the
drone's unlock signal, it will automatically exit the standby mode. If there is
no flight controller support, you can choose to turn off this function.
10-Language:
Language switching English/中文.
11-Low Battery:
Detect Goggles low battery alarm, intelligently identify the voltage of 2, 3,
4, 6 string LiPo batteries, alarm when a single battery is lower than 3.5V,
red font and buzzer alarm when the voltage is too low.
12-Goggle icon:
You can choose to display or hide the icons on the main menu interface.
13-Broadcast:
After turning on the broadcast switch, others can receive your video
transmission through the Avatar system, The 6 characters in brackets are
the unique identification number of VTX.
Menu Playback-5
Playback
AvatarG0000.mp4
AvatarG0003.mp4
AvatarG0006.mp4
AvatarG0009.mp4
25.4V 7.4V
1、The OSD switch can be turned on or off. When it is turned on, the flight
control OSD information (if any) and the flight information of the main
interface will be superimposed on the playing video interface. When the
selection box stays in the video list, press and hold the Goggles confirmation
key to open the multi-selection function, and the menu box will display
function settings (delete, select all) , cancel), press the return key again to
exit the multi-selection mode.
2、On the playback interface, click the middle button to pause/play, and
the left and right arrow keys to adjust rewind/fast forward
Specifications
Name
Communication Frequency
Transmitter Power(EIRP)
I/O Interface
Gyro
Transmission Resolution
Code Rate
Min. Latency
Average Gain
Polarization
Transmission Distance
Channel
Screen Resolution
Screen Material
Screen Size
Power Input
SD card
System
CADDXFPV SUPPORT
email: support@caddxfpv.com
Quick Start Guide
3
4
5
6
7
2 3 4
25Mbps 22ms
3 4
Channel Share
CH2
(5685-5705)
(5650-5670)
CH6
(5795-5815) (5868-5888)
25Mbps 22ms
Channel Share
25Mbps 22ms
Channel Share
Display
25
Resolution
Standard
Standby Mode
On
Goggle icon
25Mbps 22ms
Channel Share
AvatarG0001.mp4
3'25
AvatarG0004.mp4
0'25
AvatarG0007.mp4
6'24
AvatarG0010.mp4
4'20
Previous Page
25Mbps 22ms
Goggles L
5.725-5.850GHz
FCC:<30dBm; CE:<14dBm; SRRC:<20dBm;
MIC:<25dBm
4Pin 3.5mm Plug, DC5.5*2.1mm
Micro SD Card Slot,
Nine-axis gyroscope
1080p60fps, 720p60fps
Max 50 Mbps
Average 32ms
4.9dBi
LHCP
＞4km
8
1920*1080/60Hz
LCD
4.5 Inch
6V-25.2V(2S-6S)
Support 256G
Avatar HD system
V1.1
2
8
9
DI.... DI.... DI.... DI....
DI...... DI...... DI...... DI——
DI.. DI.. DI.. DI..
DI.. DI...... DI.. DI......
1. GND
2. NC
3. Head tracking upgrade port
4. PPM (Head tracking output)
Standby mode
259m
5
Settings
CH3
(5725-5745)
CH7
(5904-5924)
259m
Settings
259m
Settings
Record Set
1080p
Bitrate
Off
Language
Show Broadcast (XXXXX)
259m
Settings
AvatarG0002.mp4
0'43
AvatarG0005.mp4
1'59
AvatarG0008.mp4
0'05
AvatarG0011.mp4
0'25
1/2 Next Page
259m
1
CH1
6
Playback
Auto Refresh
CH4
(5760-5780)
CHP
(5829-5849)
Playback
Share Refresh
Broadcast (XXXXX) On
Playback
Device
Standard
English
On
Playback
OSD
3'03
0'05
4'01
12'20
8
123G
9
123G
7
123G
5.9G
CH2
123G
5.9G
CH2
，
123G
5.9G
CH1
123G
5.9G
CH1