Victor WILSHIRE VDTJ-1450 Quick Setup Manual

BASIC SETUP OF THE VDTJ-1450 JUKEBOX:
1. Determine the ideal location for the jukebox. The unit should be
placed on a sturdy surface away from any heat or water sources.
2. Connect the power cable to a nearby power supply.
3. Unwind the FM antenna wire and extend to full length.
4. Press the
button to turn the unit on
5. Press the FUNC button to select the source
(FM/AUX/BLUETOOTH
6. Rotate the VOLUME knob to adjust the desired sound level.
7. Press and hold the
CONNECT BLUETOOTH
1. Press the FUNC button to select Bluetooth
display will show "bt".
2. Turn on the external device and activate the Bluetooth
function.
3. Search for and select "VICTOR VDTJ-1450" on the paired
devices list. If prompted for a password, enter "0000" and
then press "OK" on your external device.
4. After a few seconds your Bluetooth
complete. A rising tune will indicate a successful
connection has been made.
•This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE
logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at
services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT'S OPERATION
WILSHIRE
Desktop Bluetooth
VDTJ-1450
® ).
button to turn the unit off.
®
mode—the
®
connection will be
®
Jukebox
®
®
www.victor-brand.com. All other products,