LED Technologies ReVive Lux Collection dpl IIa Quick Start Manual page 4

4
1) Prep
Wash and dry treatment area to start with clean skin, free of
any light-blocking ingredients.
2) Power
Plug in device. Press the On/Off button to turn on the device.
Press the On/Off button to cycle through available settings.
3) Glow
Place the device gently on skin and hold it in place. Do not
move or wave the device around.
4) Repeat
The device will shut off automatically after three minutes. If desired,
move the dpl IIa to the next area and repeat the steps above.
Comfort goggles are provided for your use and protection. It is recommended to
use the protective goggles when performing treatments with blue light settings.
STEPS TO
get glowing