Subscribe to Our Youtube Channel
Related Manuals for Weber UK WFP40I
Summary of Contents for Weber UK WFP40I
- Page 1 User’s guide WFP40I Heavy Duty King Pin Press 40,000 Kg WEBER UK LTD Unit 10, First Avenue, Bluebridge Ind. Est. Halstead, Essex. CO9 2EX Tel.: 01787 476319 Fax: 01787 274926 E-mail: sales@weberuk.com www.weberuk.com...
- Page 2 THIS PAGE HAS BEEN LEFT BLANK ON PURPOSE...
-
Page 3: Optional Equipment
KING PIN PRESS MODELS King Pin Press hydraulic cylinder piston rod and pushing the pin through the frame top. WFP40 Single Stage Manual Hand Pump WFP40-DA Two Stage Manual Hand Pump WFP40-AP Pneumatic Operated Hydraulic Pump Supplied with: (FIG. B) 6 x various size mandrels, 2 x adjustment spacers, 1 x cylinder anvil,... -
Page 4: Operation
mandrel collar sits squarely on the face of the ALWAYS READ THE INSTRUCTIONS piston rod. It is sometimes preferable to start the BEFORE USING THIS EQUIPMENT: king pin removal with a short mandrel then finish removal of king pin with a longer mandrel. Familiarise yourself with this products Position King Pin Press cylinder at the bottom of application, as well as the products limitations... - Page 5 WFP40AM Air Hydraulic Operated Pump PUMP The pump can be used for the 40 tonne or the When connecting the hydraulic fluid 75 tonne Kingpin Press. Follow the supply line to the hydraulic cylinder, instructions as before for setting up the care must be taken to ensure that the hydraulic cylinder.
-
Page 6: Parts List
PARTS LIST Pos: Component: Qty: Frame Top Housing Main Frame Nut Set 14 Main Frame Stud Stud Lock Nut Cylinder Insert Cylinder Cylinder Spring Piston Rod Piston Cylinder Seal Set* Piston Anvil Main Frame Anvil Mandrels (Note Shown) Stud & Nut Set 2 pcs set 50mm Spacer 100mm Spacer... - Page 7 EC Declaration of Conformity for Machinery Directive 2006/42/EC Hydraulic King Pin Press - Model: WFP40I are in conformity with the provisions of the Machinery Directive (Directive 2006/42/EC) as amended 29 December 2009 and with national implementing legislation. We hereby certify that the equipment covered by this test certificate has been tested to An overload without showing any defect.
- Page 8 UK Declaration of Conformity for Machinery Supply Machinery (Safety) Regulations 2008 Hydraulic King Pin Press - Model: WFP40I are in conformity with the provisions of the Supply of Machinery (Safety) Regulations 2008 as amended 01 January 2021 and with national implementing legislation.
Need help?
Do you have a question about the WFP40I and is the answer not in the manual?
Questions and answers