Table of Contents
Advertisement
Quick Links
Verti-Air® 400
Translation of the original user manual
Versie: UM145400000EN-2423
Applies to:
145.400.000 Verti-Air® 400A
145.400.001 Verti-Air® 400B
145.400.002 Verti-Air® 400C
145.400.003 Verti-Air® 400D
145.400.004 Verti-Air® 400E
Redexim B.V. | Kwekerijweg 8 | 3709 JA Zeist | The Netherlands
T: +31 (0)306 933 227 | E:
redexim@redexim.com
| W:
www.redexim.com
Advertisement
Table of Contents
Summary of Contents for Redexim Verti-Air 400
- Page 1 Applies to: 145.400.000 Verti-Air® 400A 145.400.001 Verti-Air® 400B 145.400.002 Verti-Air® 400C 145.400.003 Verti-Air® 400D 145.400.004 Verti-Air® 400E Redexim B.V. | Kwekerijweg 8 | 3709 JA Zeist | The Netherlands T: +31 (0)306 933 227 | E: redexim@redexim.com | W: www.redexim.com...
-
Page 2: Eu - Declaration Of Conformity
EU - DECLARATION OF CONFORMITY Redexim B.V. Kwekerijweg 8 3709 JA Zeist, The Netherlands declare that this “EU - DECLARATION OF CONFORMITY” is issued under our sole responsibility and belongs to the following product: VERTI-AIR® 400 WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS... -
Page 3: Declaration Of Conformity
UK - DECLARATION OF CONFORMITY Redexim B.V. Kwekerijweg 8 3709 JA Zeist, The Netherlands declare that this “UK - DECLARATION OF CONFORMITY” is issued under our sole responsibility and belongs to the following product: VERTI-AIR® 400 WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS... -
Page 4: Foreword
WARRANTY CONDITIONS The warranty, which applies to this product, is described in the "General sales and warranty conditions" under article 12 "Warranties" and is available on the Redexim website. You can use the QR code or URL below for this purpose. -
Page 5: Table Of Contents
TABLE OF CONTENTS EU - DECLARATION OF CONFORMITY................2 UK - DECLARATION OF CONFORMITY ................3 FOREWORD ..........................4 WARRANTY CONDITIONS ....................4 PRODUCT REGISTRATION ....................4 SAFETY INSTRUCTIONS ....................6 1.1. Obligations of the user ......................6 1.2. Maintenance, repairs and adjustments ................6 1.3. Using the machine ......................7 TECHNICAL DATA .......................8 GENERAL DESCRIPTION ...................8 SAFETY STICKERS .....................9... -
Page 6: Safety Instructions
When unskilled people use, maintain or repair the machine, this could result in injuries to the user and to third parties. This should be avoided! Use only original Redexim parts for maintenance or repairs because of the safety of the machine and of the user. -
Page 7: Using The Machine
1.3. Using the machine Attach the machine to the towing vehicle according to the regulations. Pay close attention to the risk of injury! Never use the machine in the absence of protective guards and safety stickers. Check the machine for loose bolts, nuts and components before every operation. Check whether you have a clear field of vision –... -
Page 8: Technical Data
2. TECHNICAL DATA Type Recommended vehicle 33HP with minimal liftingcapacity 245kg (540lbs) 610mm (24”) behind the lifting eyes Required PTO power 25HP PTO speed 540RPM CCW (type A) 1000RPM CW (type B) 1000RPM CCW (type D) 540RPM CCW (type E) Hydraulic connections exhaust 1x double acting control... -
Page 9: Safety Stickers
4. SAFETY STICKERS Safety stickers are attached on the machine. These safety stickers must always be clearly visible and legible and must be replaced if they have become damaged (Fig. 1).` Fig. 1 Prior to using the machine, the operators of the machine must read the user manual carefully. - Page 10 You can operate the machine safely, if the PTO does not exceed the stated rpm. 900.260.424 900.260.432 900.260.426 Be careful not to get any parts of your body jammed. 900.280.404 Use certified hearing protection when using the machine. 911.340.410...
-
Page 11: First Installation
5. FIRST INSTALLATION The machine should be prepared for use as follows (see Fig. 2 and Fig. 3): Make sure that the cable/crane/lift can lift at least 2x the weight of the machine. For the correct machine weight, see chapter 2 "Technical data". Never crawl under the machine. -
Page 12: The Pto Shaft
6. THE PTO SHAFT The description below is only an indication of how to customise the PTO shaft. The instructions described in the specific manual supplied with the PTO shaft are always leading. The PTO shaft is a very important component that takes care of the drive from the tractor to the machine. -
Page 13: Length Of The Pto Shaft
6.1. Length of the PTO shaft The length of the PTO shaft is very important. If it is too long, it can damage the drive of the tractor and/or the machine. If the overlapping length of the cylinders becomes less than 250 mm (9.8”) at any time, it can damage the PTO shaft. -
Page 14: Attaching And Detaching The Machine
7. ATTACHING AND DETACHING THE MACHINE Attaching and detaching the machine has to be done carefully. Follow the instructions below: Fig. 5 7.1. Attaching the machine Prior to attaching the machine, check the following points: Check whether the machine is undamaged and whether it is safe to attach and use the machine. -
Page 15: Detaching The Machine
If the machine is not correctly mounted behind the tractor, different PTO angles can cause vibrations in the machine's drivetrain. These vibrations can damage the machine. 6. Connect the PTO (4) between the machine and the tractor. (free-running clutch on machine side) 7. -
Page 16: Transport
8. TRANSPORT The user is responsible for transporting the machine on public roads. Verify the national legislation regarding the regulations. In view of the machine’s weight, it is not advised to drive faster than 20 km/h (12.4mph with a raised machine. Higher speeds can lead to hazardous situations and result in damage to the machine and tractor. -
Page 17: Putting The Machine Into Operation
9. PUTTING THE MACHINE INTO OPERATION 9.1. Safety Before starting to use the machine, check the following: 1. Are there any loose objects on the field, other than what this machine is intended for? Remove them first or keep a sufficient distance from them. 2. -
Page 18: Workspeed
Fig. 7 Therefore, after the first day, the V-belts should be readjusted (Fig. 7). 1. Turn off the tractor and remove the key from the ignition. Remove the V-belt guard and check the V-belt tension at location A. 2. If necessary, adjust it with the adjustment bolts (2x) (B). 3. -
Page 19: Start/Stop Procedure
9.4. Start/Stop procedure The start procedure is very important. If this procedure is not executed as described below, it might result in serious damage to the machine. The start procedure is as follows: 1. Check the machine for any loose components and look whether all components function properly. -
Page 20: Technical Information
TECHNICAL INFORMATION In general the Verti-Air® 400 is not a complicated machine. A number of technical items will be explained. If you have further questions regarding this machine, please contact your dealer. 10.1. Hydraulic: changing the exhaust position The blowing direction is controlled by a hydraulic motor with double connections for all types Verti-Air® 400, accept type E. -
Page 21: Options
OPTIONS For the Verti-Air® 400 the following options are available 11.1. Implement Triangle Cat. 1,2,3 For easy attachment of the Verti-Air® 400 Implement Triangle Cat. 1,2,3 is available (Fig. 9). Itemnumber 245.000.008, see image below, this kit consists of the frame and the fastening materials needed. -
Page 22: Maintenance
MAINTENANCE 12.1. Maintenance schedule Time schedule Check point Work activities Before every use Check for loose parts, bolts and Tighten loose bolts / nuts with the correct nuts tightening moment General check Attach the machine to the tractor and operate the machine for 5 minutes. Listen and observe any strange movements / sounds Check for oil leakage... -
Page 23: V-Belt Tension
After every 500 Change the oil in the gearbox. Use 80W90 GL5 (1.1L / 1.16qts) workhours or every year Check the tension of the V-belts If needed re-tighten the belts according to 12.2 General check Attach the machine to the tractor and operate the machine for 5 minutes. -
Page 24: Cleaning
12.3. Cleaning If a high-pressure cleaner is used to clean the machine, then observe the following rules: • Do not use aggressive cleaning agents that can affect the machine. • Maximum water pressure: 70 Bar (1015 PSI) • Maximum water temperature: 50°C (122°F) •... -
Page 25: Changing Gearbox Oil
12.5. Changing gearbox oil The oil in the gearbox should be changed periodically, see maintenance schedule (12.1), proceed as follows: 1. For a few minutes, let the machine run above the ground so that the oil becomes warm. 2. Stop the machine and lower it onto the underground so that it is parallel to the underground. Switch off the tractor’s engine and PTO before descending. -
Page 26: Troubleshooting ( Problem Analysis)
Fig. 14 TROUBLESHOOTING ( PROBLEM ANALYSIS) Problem Possible cause Solution Change the length of the toplink until Machine vibrates. PTO shafts do not align the shafts align. Wear & tear Check the drive system and rotor. V-belts have a tough spot after a long stand still Let the machine run for a longer period.
Need help?
Do you have a question about the Verti-Air 400 and is the answer not in the manual?
Questions and answers