Page 2
ASSEMBLY AND USE Screw the 510 thread magnetic connector onto your cartridge and drop into the slot of the device. Draw directly from cartridge to activate. *To prevent overheating, the battery will cut off any session over 10 seconds. *To avoid residue, remove the cartridge when not in use. AIRFLOW SETTINGS The gap on the airflow collar can be adjusted to increase or decrease airflow.
VOLTAGE SETTINGS Voltage Check During inhalation, the LED light(s) will indicate the voltage in use. 2.8V 3.2V 3.6V Switching Voltages The default voltage is 2.8V. To switch between different voltage settings, long-press the power button and the LED light(s) will blink 3 times to indicate the voltage in use.
When the charging cable is detached, the lights will blink 5 times. *Do not leave the charging device unattended or charge overnight. OPERATING CONDITIONS Charger power supply: 5V, ≥500mA Charging temperature: 50-113°F (10-45°C) Working temperature: 32-140°F (0-60°C) Storage temperature: 64-82°F (18-28°C) Operating humidity: 35%-70%RH Storage humidity: 35%-70%RH WARNING...
Page 5
CCELL will provide repair or replacement according to the following terms and conditions. This warranty provides repair or replacement for defective and damaged CCELL products within 180 days from the date of purchase. Presentation of the original purchase receipt and this warranty card will be required.
WARRANTY CARD PRODUCT INFO Product Model PURCHASE INFO Purchase Date (YYYY/MM/DD) Store Name Store Address State Zip Code CUSTOMER INFO Name Address State Zip Code Phone Email...
Need help?
Do you have a question about the Palm Pro and is the answer not in the manual?
Questions and answers