Commodore VIC 20 Quick Start Manual

(VT1011)
LOADING AND STARTING THE PROGRAM
=
VWic20 USING THE VIC
HOME CALCULATOR
The friendly computer
O O AND wo A OQ
. Set up your VIC20 computer, TV set, and Commodore
. Place the tape in the recorder, label side up. Most tapes
. Press the REWIND key on the recorder.
VIC Programs are
easy to load and
fun to use.
cassette recorder.
are recorded on both sides, several times on each side.
s
. After a few seconds, the VIC will display FOUND (name) and the word LOADING.
. After a minute or so, the VIC says READY.
program will start.
IF YOU HAVE TROUBLE LOADING
1.
2.
Try moving the Datassette so the cord is fully extended (to minimize the possibility of
interference from your TV or monitor. Placing the Datassette on or near some sets may
cause interference)
z commodore
COMPUTER
Copyright' 1981 by Commodore Business Machines, Inc. All rights reserved. No part of this manual may be copied, photocopied,
published, or otherwise reproduced without written permission from Commodore Business Machines, Inc.