Advertisement
Table of Contents
Replacing and Purchasing Consumable Parts
The stopper is a consumable part. Check once a year for
damage/deterioration.
If they are heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you
purchased this product.
Before Contacting Customer Service
The utmost measures have been taken to ensure the quality of this product.
However, should the product be defective, contact your dealer and provide
the following information.
1. Product name
2. Model number (bottom of the product) ・ Type of stopper
3. Description of trouble (As detailed as possible)
4. Purchase date
Feel free to send any questions or comments about this product to the
shop where you purchased it.
For the purpose of performance improvement, designs, speci cations
and parts shown in this publication are subject to change without notice.
URL : https://tiger-corporation.hk
https://www.tiger-corporation.com/en/usa
For household use
Vacuum Insulated Bottle
Instructions
Thank you for purchasing this TIGER
Vacuum Insulated Bottle.
Please read these instructions carefully
before use and observe them during use.
Protective sheet
(attached to the
outside bottom)
*Make sure that all parts are present before use.
MODEL
MCS-A1
Cold drinks only
Lid gasket
Lid body
Spout
Cap unit
Straw
Suction
port
Stopper
Stopper gasket
Body
Lid
Loop
Button
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tiger MCS-A1
Summary of Contents for Tiger MCS-A1
- Page 1 Lid gasket The utmost measures have been taken to ensure the quality of this product. However, should the product be defective, contact your dealer and provide Thank you for purchasing this TIGER Lid body Vacuum Insulated Bottle. the following information.
-
Page 2: Safety Precautions
Safety Precautions Be sure to follow all instructions. All safety instructions described below are intended to protect the user and other individuals This symbol indicates there is a possibility Caution from physical harm and household damage. of injury or damage to property. Safety instructions are classi ed and described according to the level of harm and damage caused by improper use, as shown below. -
Page 3: How To Use
How to Use This symbol indicates there is a possibility Caution Before the rst use of injury or damage to property. When using the product, check that Observe the following when placing the Cleaning the lid gasket and stopper gasket are product in automobile drink holders. - Page 4 Pour your cold beverage into the body. After drinking the beverage, keep the body Do not ll the product above the maximum in an upright position and securely close level as shown in the gure. the lid. Approx. 1cm When closing the lid tightly, press and hold the 1/2inch top of the lid until you hear a click.
-
Page 5: How To Clean
*Product model used in this video is MCS-A050 which has a lid When the gasket becomes stained with same structure as MCS-A1. Depending on the beverage, the beverage color may remain on the gasket. There is no problem in using the gasket even if it becomes stained. -
Page 6: Speci Cations
Removing and attaching the stopper gasket Removing and attaching the gasket Stopper Slowly remove the stopper gasket while Do not attach the gasket in the incorrect place or direction. holding its edge. When attaching the stopper gasket, make The contents may leak. sure to fit it completely in the proper direction.
Need help?
Do you have a question about the MCS-A1 and is the answer not in the manual?
Questions and answers