Sofiton LJC-GPLX-04273-11 Manual

Item:
LJC-GPLX-04273-11
WARNING
1. PLEASE READ important safety instructions thoroughly prior to the installation
2 .This lighting fixture is suitable for use with an AC/DC 12-24V power supply.
3. For use with OUTDOOR low voltage landscape lighting systems ONLY.
USE AND CARE GUIDE
4. DO NOT install within 10ft of pools, spas or fountains.
5. DO NOT install or connect wires with wet hands.
6. Only use CSA or UL approved low voltage wire..
Low Voltage LED Landscape Spot Light
Before returning to your retailer, please contact us
if you have any questions or problem with this product
Assembly and Installation
SELECT WIRE (NOT INCLUDED)
Use the correct gauge wire, depending on the waltage of the fransformer.
Failure to use correct gaugewire may result in RISK OF FIRE OR ELECTRIC
SHOCK.
NOTE: lt is recommended to use 12AWG, 14AWG, 16AWG or 18AWG wire as
the main power cord.
TRANSFORMER INSTALLATION
Step 1: Prepare a 120V to 12-24V transformer (not included) , a main power
cord (not included)connectors (optional, not included) and the fixtures.
NOTE: The total power of the light fixtures should NOT exceed 80%% of the
total rating of the transformer.
Step 2: Turn the power off, and connect the main power cord to the trans-
former.
Step 3: Move the main power cord to the proper position to make it easy to
PACKAGE CONTENTS
install.
A B
A – Lamp body x1
B – Ground stake x1 C – Wire Nut x2