Advertisement
Quick Links
Advertisement
Summary of Contents for yamagahome C230116S
- Page 1 Method A Method B C230116S...
- Page 2 When using the electric screwdriver , Reduce the power and torque to avoid damaging the furniture P-01...
- Page 3 Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact us for free replacement if having damaged or missing parts. P-02...
- Page 4 Parts & Hardware List 2pcs 2pcs 2pcs 2pcs 4pcs 2pcs 6pcs Parts & Hardware List 4pcs 2pcs 4pcs 6pcs 4pcs 3pcs 6pcs 2pcs 3pcs 2pcs 6pcs 2pcs 3pcs 8pcs P-03...
- Page 5 Installation of Cams and Pins Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened.
- Page 6 P-05...
- Page 7 Choose the location of the guitar stand according to your needs Installation instructions for Installation instructions for guitar stand on the left guitar stand on the right side Method A Method B P-06...
- Page 8 Method A Method B The force of the screw rod should be divided equally between the two pipes. P-07...
- Page 9 Method A Method B Method A Method B P-08...
- Page 10 Method A Method B Method A Method B Note: The protective sleeves on the 13th and 14th tubes will shrink due to elasticity. If you find that the hole positions of the protective sleeves and the iron tubes do not match during the assembly process, you can adjust the hole position to be consistent with the iron tube by pulling the protective sleeves forcefully.
- Page 11 Method A Method B Method A Method B P-10...
- Page 12 Method A Method B Method A Method B P-11...
- Page 13 No gap Method A Method B P-12...
- Page 14 Method A Method B Note: The protective sleeves on the 13th and 14th tubes will shrink due to elasticity. If you find that the hole positions of the protective sleeves and the iron tubes do not match during the assembly process, you can adjust the hole position to be consistent with the iron tube by pulling the protective sleeves forcefully.
- Page 15 Method A Method B Method A Method B P-14...
- Page 16 Method A Method B Method A Method B P-15...
Need help?
Do you have a question about the C230116S and is the answer not in the manual?
Questions and answers