Advertisement
Quick Links
Advertisement
Summary of Contents for POLICE tech P MQ-L500
- Page 1 Voice recorder in the power bank operation manual...
- Page 2 Quick Start 1) To charge the device, connect it to a USB cable PC or a power supply. 2) When you set the recording switch to the " ", the device automatically starts continuous recording after about 5 seconds. 3) Set the recording switch to " .
- Page 3 3. Loading The device has a built-in, rechargeable battery. To charge the device, connect it to a PC or power adapter using a USB cable. Once the device is connected, the battery LED on the device lights up, the LEDs light up according to the battery capacity.
- Page 4 2) When you open the program, the time and date will be automatically set by your PC. Press the Start button to save the data to your device. NOTE: If the battery is completely discharged, the settings will be erased and will need to be set again.
- Page 5 Adjusting the sound activation volume You can adjust the volume of the sound that starts recording in the Time Setup program . You can make the change in the "SVOS Level" field . VOS level Loud Quiet Fundamental Timed recording Set the recording time and duration.
- Page 6 6. Recording When you set the recording switch to the " position, about 5 ", the device starts again seconds will automatically start continuous recording. Set the recording switch to " . ". The device starts after approx. 5 seconds automatically starts recording in “Voice Control”...
- Page 7 7. Final provisions We will be happy if you also consider other products from our offer interested. The operation of the device may vary slightly depending on the series. Use the device in accordance with applicable laws. The supplier bears no responsibility for the use of the device in violation of these laws.
Need help?
Do you have a question about the MQ-L500 and is the answer not in the manual?
Questions and answers