Download Print this page

Mammoth BioShieldUV MAFABioS18W Manual

18 watt bioshield (110v)
Hide thumbs Also See for BioShieldUV MAFABioS18W:

Advertisement

Quick Links

Where to Use Install in return air, coil, and blower cabinet or supply duct.
What's Included
2x 9Watt UV Lamps
BioShield Machine
110V Power Adaptor (24VDC)
4 Sheet Metal Screws
Air Seal Strips
Installation Template
EPA Establishment Number 99470-CHN-1
Safety Precautions
Before installing, performing maintenance or service on the purifier, turn off the
main power switch to the unit. Electrical shock can cause injury or death. There
may be more than one disconnect switch.
The UV Lamp contains a small amount of mercury. If a lamp breaks, clean and
dispose of with care.
• Never expose eyes directly to UV light.
Improper installation, adjustment, alteration, service, maintenance, or use can
cause fire, electrical shock, or other conditions which may cause personal injury or
property damage. If you have questions or difficulty in installation, please consult
with a licensed electrician or contractor.
Follow all safety codes, wear safety glasses and work gloves. Real all instructions
before installation and operation of the unit.
Do not touch the lamp glass without gloves; it may reduce performance of the
lamp. Clean the lamp after handling.
UV-C Lamp Disposal
Visit www.Earth911.com for your local or state waste management program and
information about where to dispose of the used UV Lamp. Contact your local hardware
or home improvement stores and other retailers who sell UV and fluorescent bulbs.
Many stores allow customers to drop off used bulbs for recycling.
If you cannot recycle, and it is acceptable with your local waste management agency,
you may seal the bulb in a plastic bag and put in trash for collection.
BioShield
®
Ultraviolet Treatment Systems
18 Watt BioShield (110V)
sku MAFABioS18W
Questions? Need help?
www.BioShieldUV.com
(307) 364-0340
Mon - Fri 10 am to 7 pm

Advertisement

loading
Need help?

Need help?

Do you have a question about the BioShieldUV MAFABioS18W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mammoth BioShieldUV MAFABioS18W

  • Page 1 18 Watt BioShield (110V) BioShield ® Ultraviolet Treatment Systems sku MAFABioS18W Where to Use Install in return air, coil, and blower cabinet or supply duct. What’s Included Questions? Need help? • 2x 9Watt UV Lamps www.BioShieldUV.com • BioShield Machine • 110V Power Adaptor (24VDC) (307) 364-0340 •...
  • Page 2 18 Watt BioShield (110V) att BioShield 11 V) BioShield ® Ultraviolet Treatment Systems sku MAFABioS18W sku MAFABioS18W Installation must be done by a certified HVAC technician and comply with all national and local electrical and mechanical codes. Installation Instructions Before installation turn off HVAC system and ensure all electrical connections are off. 1) Identi y Suitable Location Ensure the UV bulbs will not hit nor inter- 1) Identify Suitable Location: Ensure the UV bulbs will not hit nor inter- fear with any equipments or ducting.