Advertisement
Quick Links
Baridi 5L Mini Keg Draft Beer Dispenser
Tap 4°C Integrated Cooling
Model No. DH49
Thank you for purchasing a Baridi product from the Dellonda range. Manufactured to a high standard,
this product will, if used according to these instructions, and properly maintained, give you years of
trouble free performance.
DH49 V1 Issue 5 08/03/2024
Advertisement
Summary of Contents for dellonda baridi DH49
- Page 1 Tap 4°C Integrated Cooling Model No. DH49 Thank you for purchasing a Baridi product from the Dellonda range. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
- Page 2 Important Information Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.
- Page 3 • INSTRUCTIONAL VIDEO • An instructional video to help with the setup and use of this product is available at:- https://www.dellonda.co.uk/pages/baridi-beer-dispenser-set-up Keg compartment lid CO2 Cannister housing Beer tap handle Beer tap Beer dispenser/T bar Water drain release Drip tray...
- Page 4 • IDENTIFY YOUR KEG Squeeze tabs in when • Firstly it is important to know what type of removing connector keg you wish to load into your beer dispenser from keg • This will determine how to set up this dispenser.
- Page 5 • The seal fits over the open bottom end of the • Place a new CO2 cannister into the cartridge delivery tube on the dispensing unit. housing with the thin neck pointing upwards. • Clip the beer dispenser T bar over the rim of •...
- Page 6 • BEER DISPENSING UNIT Connect to the flow valve • The beer dispensing unit or ‘T’ bar should come with the unit assembled, if not or if you Centre section (Released) choose to take it apart for cleaning please follow these instructions. •...
- Page 7 • Select a temperature setting using the LED • ACCESSORIES interface on the top of the unit (fig.9). • The Baridi beer dispenser is supplied with a • NOTE: The LED display shows the current number of additional components and some temperature of the beer and pressing and spare parts.
- Page 8 • NOTE: The drip tray only has a volume of Disconnect the keg adaptor approximately 400 ml while the unit has a Flush clean volume of approximately 800 ml. Hence water through attention will need to be paid to the draining the system process to avoid spillage.
- Page 9 No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim. Dellonda Limited, Sole UK Distributor of Baridi Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757575 support@dellonda.co.uk...
Need help?
Do you have a question about the baridi DH49 and is the answer not in the manual?
Questions and answers