Page 2
VERSATILE USE: Use on a Breeo Fire Pit or over any open fire with the Anchorpoint. Pair the Outpost Grate with the OutRig Post on the X Series Table for food preparation and serving.
Page 3
USE WITH BREEO FIRE PIT SET UP ROD Insert the peg and collar end of the Rod into the opening on the rim of your fire pit. Align pegs on the Rod with the notches on the fire pit, lower the Rod, ensure the pegs go down into the opening, and twist the Rod to secure.
Page 4
USE WITH ANCHORPOINT POSITION ANCHORPOINT Position the Anchorpoint next to where you will be cooking and ensure the horizontal stabilizing bars are perpendicular to the fire area. SECURE ANCHORPOINT Insert the top end of the Rod (opposite to the pegs and collar) into the Anchorpoint opening.
Page 5
USE & CARE Add the Outpost Grill to your Breeo Fire Pit, or experience the freedom of grilling anywhere when using the Anchorpoint. Designed to give you control of your cook over open flame. Make sure the Grate is secured firmly...
Page 6
Outpost 19 Grill or 40 lbs. of weight on the Outpost 24 Grill. When cooking on your Y Series with the Outpost Grill, do not swing the Outpost Grill system 180° away from the fire pit, this can cause potential tipping.
In addition Breeo, LLC warrants no rust through or burn through for a period of five (5) years from purchase. If a product is covered by this limited warranty, Breeo, LLC, at its option, will repair or replace with a new product free of charge, excluding any applicable shipping and handling charges.
Need help?
Do you have a question about the OUTPOST GRILL and is the answer not in the manual?
Questions and answers