OAKWORKS BJX10A.D-30N6 Installation And Operating Instructions Manual

Built-in warming drawer

Advertisement

Quick Links

Built-in Warming Drawer
INSTALLATION AND OPERATING
INSTRUCTIONS
SPA-RA-PM-136 Rev. 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BJX10A.D-30N6 and is the answer not in the manual?

Questions and answers

Summary of Contents for OAKWORKS BJX10A.D-30N6

  • Page 1 Built-in Warming Drawer INSTALLATION AND OPERATING INSTRUCTIONS SPA-RA-PM-136 Rev. 2...
  • Page 2: Table Of Contents

    INTRODUCTION Dear customer: Thank you for choosing our product. This appliance is easy to use; however please read this handbook carefully before installing and operating it. Herein you will find the correct method of installation and tips for the best use and maintenance of the product CONTENTS PRODUCT DESCRIPTION ....................
  • Page 3: Product Description

    PRODUCT DESCRIPTION Control Panel Push to open the drawer Control panel Press Power icon to turn on the arming drawer Press the Temperature icon to select LOW, MED or HIGH range temperature. The warming drawer default setting work for 2 hours, or it can be set work for 6H if required. (If select for 6H, the warming drawer will be set on MED temperature range automatically).
  • Page 4: Technical Parameters

    TECHNICAL PARAMETERS Built-in Warming Drawer Product BJX10A.D-30N6 Model Number 110V AC / 60Hz Voltage/Frequency 180W Heating Wire Rated Power LOW, MED, or HIGH range Temperature Range 120min Default Woking Duration 20kg Max Load 30L±10% Capacity 180W Rated Power 13kg Net Weight...
  • Page 5: Installation Instructions

    INSTALLATION INSTRUCTIONS Warnings for Power Connection: ● The appliance must be connected in accordance with current electrical regulations; ● Fixed wiring installation is to be done only by an authorized electrician; ● THIS APPLIANCE MUST BE EARTHED; ● With earth single phase socket, use the proportionate load and complying with the regulations in force;...
  • Page 6: Safety Instructions

    SAFETY INSTRUCTIONS Cookware Safety ● Plastic containers or plastic wrap can melt if in direct contact with the drawer or a hot utensil. If it melts onto the drawer, it may not be removable. ● Do not place plastic cutleries or bottles which have a melting point below 100°C into the drawer.
  • Page 7: Troubleshooting

    TROUBLESHOOTING Scenario Solution Possible Cause Turn the warming drawer Power is not switched on power on control panel does not function Contact the service Loose connection representative for replacement Contact the service Warming drawer fails to heat up Heating element damage representative for replacement CIRCUIT DIAGRAM Heating Wire Element...

Table of Contents