Advertisement
Quick Links
E
Series
Installation Instructions
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
When using electrical equipment, basic safety precautions should always be followed including the following:
• DISCONNECT AC POWER SUPPLY BEFORE SERVICING.
• Installation and servicing of this equipment should be performed by qualified service personnel only.
• Ensure that the electrical wiring conforms to the National Electrical Code NEC® and local regulations
if applicable.
• For use with metal enclosure wiring systems.
• Do not mount near gas or electrical heaters.
• Do not use outdoors.
• Equipment should be mounted in locations and at heights where it will not be readily subjected to tampering
by unauthorized personnel.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
• Any modification or use of non-original components will void the warranty and product liability.
• Do not use this equipment for other than intended use.
• Allow battery to charge for 24 hours before first use.
SAVE THESE INSTRUCTIONS!
REV1
Advertisement
Related Manuals for MULE ELX Series
Summary of Contents for MULE ELX Series
- Page 1 Series Installation Instructions IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. When using electrical equipment, basic safety precautions should always be followed including the following: • DISCONNECT AC POWER SUPPLY BEFORE SERVICING. • Installation and servicing of this equipment should be performed by qualified service personnel only. •...
- Page 2 Panel assembly Electrical Connections section. Battery Connect 11. Secure the mounting plate to the junction box. Fig. 4 J-box Mounting plate Canopy REV1 Mule Lighting® 46 Baker Street, Providence, RI 02905 Phone: (800) 556-7690 Fax: (401) 941-2929...
- Page 3 Electrical Connections section. Panel assembly 11. Secure the mounting plate to the junction box. Battery Connect Fig. 8 J-box Canopy Mounting plate REV1 Mule Lighting® 46 Baker Street, Providence, RI 02905 Phone: (800) 556-7690 Fax: (401) 941-2929...
-
Page 4: Electrical Connections
Chevron Placement • If chevron is needed remove only the instruction film. • If no chevron is needed, remove both the instruction film and chevron together. REV1 Mule Lighting® 46 Baker Street, Providence, RI 02905 Phone: (800) 556-7690 Fax: (401) 941-2929... - Page 5 Note: After solving the fault of emergency equipment, please press test button for 2 seconds then release to reset. LED indicator will show green. “SD” models also have a manual test function, press test button as follows: REV1 Mule Lighting® 46 Baker Street, Providence, RI 02905 Phone: (800) 556-7690 Fax: (401) 941-2929...
Need help?
Do you have a question about the ELX Series and is the answer not in the manual?
Questions and answers