Advertisement
Quick Links
Setup Guide
iMatrix
NEO-1DP Sensor
Step 4
Scan QR code on the back side of
your sensor.
Step 1
Remove a protective cap from your
sensor probe.
Step 5
Follow instructions on the screen of
your phone.
Step 2
Download iMatrix app.
Step 6
Give your NEO-1DP a unique name
and take a photo (optional).
Step 3
Open the app and click on the + icon
in the top-right corner of the screen.
Step 7
View your sensor measurements.
Advertisement
Summary of Contents for iMatrix NEO-1DP
- Page 1 Step 4 Step 5 Step 6 Step 7 Scan QR code on the back side of Follow instructions on the screen of Give your NEO-1DP a unique name View your sensor measurements. your sensor. your phone. and take a photo (optional).
- Page 2 Step 8 NEO-1DP Sensor allows you to view different screens. Press button once to wake the NEO-1D and press button again to switch between screens. Note: It takes ~ 2 seconds to refresh or switch screens...
-
Page 3: Advanced Settings
Step 9 Step 10 Step 11 On your computer, go to Access settings interface by Customize your NEO-1DP. Give it a cloud.imatrixsys.com/registration selecting the cogwheel Icon in the top name, for example, ‘‘Wine Cellar’’ and create an account and store data. - Page 4 Note: To receive Alerts in real-time, phone number and number for SMS you need to be within Bluetooth range messages to receive Alerts from your with the App running or use an iMatrix sensor. Wi-Fi Micro Gateway. Step 16 Select the sensor for which you want...
- Page 5 • To turn OFF your NEO-1DP quickly press the button on the back of the unit three times within 2 seconds. Red LED on the front will blink 3 times, and then the display will show a “SLEEP” shut-off state.
Need help?
Do you have a question about the NEO-1DP and is the answer not in the manual?
Questions and answers