Do you have a question about the JMG-80216M and is the answer not in the manual?
Questions and answers
Jacques Kirby
March 18, 2025
This pressure washer broke on the third use when the hose got a slight kink. How do i return it? Is there a warranty???
Summary of Contents for FLAWNT JMG-80216M
Page 1
ELECTRIC PRESSURE WASHER User Manual JMG-80216M CUSTOMER SUPPORT: flawnt-customercare@outlook.com WARNING: Read the instruction before operation. This machine is designed for domestic use only! Commercial or industrial use are prohibited.
Contents Product Description Safety Instruction Know Your Electric Pressure Washer Assembly Operation Technical Specification Maintenance and Care Troubleshooting Customer Support Product Description This electric pressure washer is designed for versatile use, offer- ing powerful cleaning capabilities for vehicles , machines, build- ings , facades, driveways, decks, sidewalks, garden furniture, and various surfaces.
Page 3
If defects are found, do not use the machine and contact customer service. (flawnt-customercare@outlook.com) WARNING: Always follow basic safety precautions while operat- ing the pressure washer to reduce the risk of fire, electric shock, and personal injury.
Page 4
WARNING: Before re-use, ensure the system is thoroughly flushed of any antifreeze. By adhering to these instructions, operators will ensure a safer working environment and prolong the lifespan of the pressure washer. Always consult the full manual and contact cus- tomer service for any uncertainties or issues. (flawnt-customercare@outlook.com)...
Assembly 1. Position the washer as CLOSE as possible to the water supply. 2. Slide the pressure water sprayer holder and cord holder into the positions (Fig.1). Fig. 1 Fig. 2 3. Tighten the transport handle with two screws ( Fig.2 ). 4.
Page 7
Tips: 1.Nozzle Type The 0º intense-jet nozzle ( red) is a powerful nozzle designed for concen- trated , high-pressure cleaning. It's ideal for removing tough stains like tar and grease from concrete and for cleaninghard-to-reach areas , such as 0º 2-story building facades and the undersides of lawn equipment.
Page 8
10. The foam cannon is featured with a foam-volume adjustable knob. Follow the instructions as shown to use the foam-volume adjustable knob (Fig.9). Foam-volume Fig. 9 adjustable knob 11. Connect the high-pressure hose to pressure water sprayer (Fig.10). 12. Connect the high-pressure hose to the water outlet on the washer (Fig.11). Fig.10 Fig.11 Pressure water sprayer...
15. Plug the power cord into the power source (Fig.14). Note: The GFCI may need to be reset when first plugged into the elec- tric outlet. Press the "Reset" button until the power light indicator on the GFCI illuminates. Fig.14 Reset Power light indicator...
Shutting Down Turn the switch to the OFF position and unplug the power cord from the outlet. Turn off the water source. Hold the trigger to release water pressure. Disconnect the garden hose from the water inlet on the unit. Disconnect the high-pressure hose connection on the pressure water sprayer handle .
Maintenance and Care CAUTION! Before working on the pressure washer, disconnect the plug from the power supply socket. 1. Clean the nozzle using the needle clean-out tool provided (Fig. 18). Remove the spray wand from the sprayer, clear any debris from the nozzle hole, and rinse it 2.
Page 12
5.Clean the water inlet filter. 6.Straighten the hose to clear any kinks or blockages. Machine 1.Pump/sprayer is leaking. Please mail: often starts flawnt-customercare@outlook.com 2.Trigger mechanism is broken. and stops for assistance. by itself Machine 1.Pump/ hoses or accessories 1.Allow pump, hoses, or accessories starts, but to thaw.
Need help?
Do you have a question about the JMG-80216M and is the answer not in the manual?
Questions and answers
This pressure washer broke on the third use when the hose got a slight kink. How do i return it? Is there a warranty???