Advertisement
Quick Links
99367
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service
manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all
cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on
specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
GENERAL TECH TIP:
•
Rushing the procedure will require 30 second removal of negative battery cable!
•
All remotes must be present at time of programming.
•
One programmed remote required at time of programming.
•
Programmer will expire after 5 attempts.
•
Due to the programming process being sensitive to voltage drops, it is recommended that a battery charger is hooked up to the vehicle before
beginning the programming process.
Programming Instructions
Setup Vehicle for Programming:
STEP 1: Open driver's door.
STEP 2: Without your foot on the brake pedal, press the start/stop button twice to the ON position.
STEP 3: Turn Hazard light ON.
STEP 4: Plug programmer into OBD II port located
under steering wheel.
STEP 5: Programmer will beep twice.
STEP 6: Press the start/stop button to the OFF position.
STEP 7: Programmer will beep once.
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto
technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in
property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National
Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492
©2021 No reproduction in whole or in part without prior written approval.
REMOVAL/INSTALL INSTRUCTIONS:
REMOVAL/INSTALL OF KEYLESS ENTRY REMOTE (99367)
Nissan Altima 2016–13
KEYLESS ENTRY REMOTE
Disclaimer:
99367_Instructions
Advertisement
Summary of Contents for Dorman 99367
- Page 1 Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature. Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approval.
- Page 2 Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature. Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approval.
Need help?
Do you have a question about the 99367 and is the answer not in the manual?
Questions and answers