Advertisement
Quick Links
MT1900-NL
SINGLE HANDLE HOT & COLD
WATER DISPENSER FAUCET
INSTALLATION SHEET
19" SUPPLY LINE
WITH 1/4"
COMPRESSION
OUTLET TO TANK
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-LINES AND
ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES -
CHECK LOCAL CODES
WARRANTY
FOR WARRANTY INFO PLEASE VISIT WWW.MOUNTAINPLUMBING.COM/PAGE/RESOURCES/WARRANTY
FINISH CARE & MAINTENANCE
NEVER USE ANY HARSH ALKALI, ACID BASED DETERGENTS OR CLEANERS SUCH AS SOFT SCRUB®, SCRUBBING BUBBLES® OR COMET® TO CLEAN. DO NOT USE
BRILLO® OR SCOTCH BRITE® PADS. THESE WILL ALL HARM THE FINISH. TO CLEAN, USE ONLY A DAMP SOFT CLOTH AND WIPE GENTLY. STANDARD WINDEX® CAN
ALSO BE USED SPARINGLY. IT IS NOT NECESSARY TO WIPE HARD TO REMOVE SPOTS. TO MAINTAIN THE FINISH, WIPE WITH A SOFT DRY CLOTH AFTER USE. AN
OCCASIONAL COAT OF PURE CARNAUBA WAX WITHOUT CLEANERS WILL HELP PORTECT THE FINISH.
6/19/2024
19" SUPPLY LINE
WITH 3/8"
COMPRESSION
INLET
10mm MOUNTING NUT
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.mountainplumbing.com
888-222-9140
•
REQUIRES LITTLE GOURMET® HEATING TANK
MT641-3 (SOLD SEPARATELY)
•
FITS MOUNTING HOLE FROM 1 - 1/8" TO
1 - 1/2" DIAMETER
•
NSF 61 & NSF 372 CERTIFIED, Q ≤ 1
•
WILL FIT DECK UP TO 2 1/4" THICK
•
MOTION 25 C 90 degree CERAMIC CARTRIDGE
(BF26028)
•
HANDLE IS NOT SPRING-LOADED
•
REVERSE OSMOSIS SAFE (OPTIONAL AIR GAP
AG1800 SOLD SEPARATELY)
•
INCLUDES CONNECTION HARDWARE AND 2 FT
SILICONE HOSE TO CONNECT HOT TANK
(PART # RKDW-HOSEKIT)
•
COMPATIBLE WITH MT1250XL, MT660, AND
MT662 FILTRATION SYSTEMS (SOLD
SEPARATELY
fax 972-456-2719
Page 1
Form MT1900-NL inst sht
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mountain MT1900-NL
Summary of Contents for Mountain MT1900-NL
- Page 1 ALSO BE USED SPARINGLY. IT IS NOT NECESSARY TO WIPE HARD TO REMOVE SPOTS. TO MAINTAIN THE FINISH, WIPE WITH A SOFT DRY CLOTH AFTER USE. AN OCCASIONAL COAT OF PURE CARNAUBA WAX WITHOUT CLEANERS WILL HELP PORTECT THE FINISH. Page 1 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 6/19/2024 www.mountainplumbing.com 888-222-9140 fax 972-456-2719 Form MT1900-NL inst sht...
- Page 2 MT1900-NL REPLACEMENT PARTS MT1401-2003-15-LF SPOUT TIP ADAPTER SPOUT VARIES BY MODEL MT1900-1205 STMT277-61-6 LOCK COVER SPOUT LINER HOSE MT1900-1206 LOCK BAR SPRING0006 MT550-8003 COMPRESSION HOSE BARB (2) SPRING CLIP0007 MT1900-1203 TEFLON CLIP CARTRIDGE NUT MT1900-1202 SRSN0832L0501 LEVER HANDLE #8-32-UNC-L5 (3)
- Page 3 5. MAKE SURE THE HEATING TANK IS LOCATED SO THAT THE WCD2002 HW TANK HOSE CAN BE CONNECTED DIRECTLY TO THE HEATER WITHOUT ANY EXTENSIONS. DO NOT REPLACE INCLUDED SILICONE TUBE WITH A TUBE NOT PROVIDED BY MOUNTAIN PLUMBING. INSTALL THE HEATING TANK PER THE INSTRUCTIONS SUPPLIED WITH THE HEATING TANK.
- Page 4 FINISH CARE & MAINTENANCE NEVER USE ANY HARSH ALKALI, ACID BASED DETERGENTS OR CLEANERS SUCH AS SOFT SCRUB®, SCRUBBING BUBBLES® OR COMET® TO CLEAN. DO NOT USE BRILLO® OR SCOTCH BRITE® PADS, AS THESE WILL ALL HARM THE FINISH. TO CLEAN, USE ONLY A DAMP SOFT CLOTH AND WIPE USING A SOFT CLOTH. STANDARD WINDEX® CAN ALSO BE USED SPARINGLY.
Need help?
Do you have a question about the MT1900-NL and is the answer not in the manual?
Questions and answers