Advertisement
Quick Links
TECHNICAL BULLETIN
A t o N I X 1 0 t o D r a k e L i g h t i n g I n s t a l l a t i o n M a n u a l
Product:
12003052 -
Brand(s):
SPX AtoN (All Brands)
Effective Date:
January 13, 2024
Part Affected:
12003051 -
Issued By:
Joshua Crowne, Manager, Systems and Solutions Engineering
This bulletin is issued to provide a method of procedure for installing a IX10 modem into a Drake Lighting
system. When there is no communication with the modem at a Drake/Technostrobe site you will need to
replace the Drake WR11 modem with a AtoN IX10 modem. This kit comes with the parts needed for this.
The parts included are below.
51001525
PWR-5VDC-BOOST
HAR-IX10-PWR
Power Cable for IX10 Modem
ITL-9700-MOD
MON-9700 Modem board assembly
HDW-F362-500
HDW-NYL6-313
HDW-0632-31S
HDW-BUTT-BLU
AtoN IX10 Modem Kit for Drake Lighting Installation Manual
AtoN IX10 Modem Kit for Drake Lighting
AtoN IX10 Modem
DC-DC Boost Converter
Flush Mount Screws
Nylon Spacers
Panhead Screws
Butt-splice
UNCONTROLLED IF PRINTED
©2024 SPX Aids to Navigation, LLC. All rights reserved.
RevA
Page 1 of 8
Advertisement
Summary of Contents for SPX AtoN IX10
- Page 1 When there is no communication with the modem at a Drake/Technostrobe site you will need to replace the Drake WR11 modem with a AtoN IX10 modem. This kit comes with the parts needed for this. The parts included are below.
-
Page 2: Install Instructions
The WR11 modem can be found in 2 different places shown below. 3. Install a Verizon SPX AtoN SIM Card (51001526) into the IX10 modem using SIM card slot one. 4. Install the ITL-9700-MOD where the WR11 was mounted using 4 HDW-NYL6-313 and 4 HDW- F362-500 spacers and screws. - Page 3 10. Connect the antenna to the IX10 Modem. 11. Connect the Ethernet cable to the IX10 Modem. 12. Power the lighting system with the external breaker. RevA UNCONTROLLED IF PRINTED Page 3 of 8 ©2024 SPX Aids to Navigation, LLC. All rights reserved.
- Page 4 GREEN or OFF If the modem does not come up on the network, switch the SIM card to a AT&T SPX AtoN SIM Card (51001527) and repeat step 13. If it doesn’t you need to call SPX technical support. 14. Take a screenshot of the web GUI modem status page. This will need to be sent to SPX in the closeout to record the IP Address and signal strength.
- Page 5 17. Login to the Drake/Technostrobe web GUI a. Username => super admin b. Password => superadmin0! 18. Click on the ‘Configuration Page’ button. RevA UNCONTROLLED IF PRINTED Page 5 of 8 ©2024 SPX Aids to Navigation, LLC. All rights reserved.
- Page 6 Traps Secondary Destination => 20. Click the ‘Submit’ button. 21. Verify that the change was successful and written to Flash. 22. Connect with SPX AtoN NOC to onboard, test communication and test alarms. RevA UNCONTROLLED IF PRINTED Page 6 of 8...
- Page 7 9. Picture of the signage with the site identification clearly visible. 10. Send all these pictures in their highest quality to AtoN.NOC@spx.com with the Site ID in the subject. RevA UNCONTROLLED IF PRINTED Page 7 of 8 ©2024 SPX Aids to Navigation, LLC. All rights reserved.
- Page 8 Please contact our SPX AtoN NOC for Onboarding and Testing. They are available 24/7. Call 615-503-2228 (Flash Lighting) RevA UNCONTROLLED IF PRINTED Page 8 of 8 ©2024 SPX Aids to Navigation, LLC. All rights reserved.
Need help?
Do you have a question about the AtoN IX10 and is the answer not in the manual?
Questions and answers