SOUTHPAW 303258 Instruction Sheet

Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file this
Instruction Sheet in an accessible location. The Instruction Sheet must be read and familiar to anyone who is
using Southpaw Enterprises Equipment.
Store these instructions along with the enclosed maintenance checklist in a safe place. You may also access them on our website.
IMPORTANT: Please check equipment immediately for any damage that may have resulted during shipping.
If any damage has occurred, please contact Southpaw Enterprises, Inc. immediately.
MATERIALS LIST
Medium size Southpaw Vibro Rocker with Cover
INSTRUCTIONS FOR ASSEMBLY
Assemble the Bluetooth wireless amplifier to the
wire end connec ons as shown in image on right by
a aching the red and black wire plug ends (red to
red / black to black) to the rear of the wireless am-
plifier unit, making sure to insert the red and black
plug ends into the pair of ports which are labeled as
the "S" sec on connec ons(#13) —as shown in im-
ages shown on right. A ach power cord to DC pow-
er port (#14). Ensure wireless antenna is fastened
securely to "RF" port (#9).
OPERATION:
In order to make the rocker chair vibrate, it's amplifier unit must be
powered on and paired with a Bluetooth-capable device—ie: cell
phone, tablet, computer, etc (not included).
The Bluetooth–capable device which will be used must have audio
·
file playing capabili es.
Audio/music files which include lower, "bass tone" sounds must be
·
played in order to ac vate the vibra on effects of the rocker chair.
(ie: sounds made by a drum, a bass, a tuba, etc.)
PAIR / SNYC DEVICE to the WIRELESS BLUETOOTH AMPLIFIER
Pair/Sync your Bluetooth capable device (ie: phone or tablet) with the
Wireless Bluetooth amplifier that came with the bean bag chair:
- Plug in the power cord for the wireless amplifier unit into the
nearest available electrical power outlet.
- On the front of the wireless amplifier unit, power on the Wireless amplifier device by a single long press of the
On/Off bu on.
- When unit ini ally powers on, there will be both a red and a blue indicator light which will be lit up. When both of
these lights are lit up, it means to wireless amplifier is searching for a Bluetooth device to pair to.
- Using your Bluetooth capable device (ie: cell phone, tablet, computer, etc. ) navigate to the device's Bluetooth se ngs
and select the " DTA-21.BT2 " amplifier from the list of available bluetooth devices on your device's wireless pairing
menu op ons.
- When the wireless amplifier has been successfully paired to your device, a solid blue indicator light will appear to
the right of the On/Off bu on.
*
Please refer to the wireless Bluetooth amplifier's manufacturer's manual for full informa on regarding the details and all available opera ons of the
wireless Bluetooth amplifier unit.
Wireless Vibro-Acoustic Rocker #303258
Wireless Bluetooth Amplifier
Instruction Sheet
Maintenance Checklist
(instruc ons con nued on next page ——>)