Moog HRK Technical Data Sheet

Internal tank cleaner with water drive
•
Cleaning head RK
•
360° spray coverage
•
Variable shaft lengths
•
Water hydraulic motor
•
Adjustable speed
•
maximum 180 bar
•
maximum 30 liters/minute
•
Installation opening > ø38 mm
•
INOX 1.4301 / VITON
General description
Product features
Functionality
Adjustability
Functional safety
www.moog.ch
Technical data sheet
Technical data sheet
The HRK.STD tank cleaner with water drive consists of a cleaning head, a water drive and a connecting
pipe.
The water drive converts the water flow into rotary motion. The connecting pipe transmits this
movement and directs the high-pressure water to the spray head. There is a gearing on the spray head
which engages with a fixed gearing on the connecting pipe. This causes the spray head itself to rotate
by an additional 90°. Due to the rotation in two axes, the nozzles rotate in a spherical shape, whereby
all areas in the tank are hit once by the water spray after a certain time.
This modular design means that the individual elements can be replaced and quickly put back into
operation if servicing is required.
•
Using a compact water turbine, the energy from the water is not only used for cleaning, but also to
drive the cleaning head.
•
Rotation of cleaning head and cleaning nozzles achieves 360° spray coverage
•
Drive can also be inserted into the container
•
Rotation speed can be varied by means of water volume and can be adapted to different water
volumes using different nozzles
•
Container cleaner can be used for different container sizes thanks to pipe extension
•
Designed for durability and easy maintenance
•
Very low operating noise
•
Variants Stepped shaft lengths from 140 mm to 4000 mm are possible
•
other shaft lengths on request
HRK.STD - en-ch - 01-02-2023 - Subject to change without notice
HRK HRK.STD
1 / 3