Related Manuals for activeshop Momo 6606
Summary of Contents for activeshop Momo 6606
- Page 1 INSTRUCTIONS FOR USE Momo 6606 pantograph dust absorber Importer: ACTIVESHOP Ltd. 8B Graniczna St., building DC 2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A 05/2024...
- Page 2 Technical data Rated voltage 220-240V Power Turbine rotation 2800/3200 RPM Volume of filtered air 300/400 m3 per hour Noise level 51/58 dB Dimensions of the windmill 12cm Dimensions of the device Note - The bags for the canister absorber are disposable! In the bag once filled, the pores become clogged, resulting in poor airflow, as a consequence, the absorber ceases to perform its function.
- Page 3 electric shock or burns - Do not plug or unplug the device from the outlet with wet or damp hands. - Do not use the device under the following conditions: • When the wire or plug gets hot or damaged; •...
- Page 4 Construction of the device 1. Handle 2. Fan 3. Adjustment knob 4. Arm 5. On/Off Switch 6. Power plug 7. Air outlet Assembly of the device 1. Attach the 5 legs from the tripod to the base of the device. (As shown in the picture below) 2.
-
Page 5: Security Measures
3. Do not install or operate the device near liquids, wet places or with wet hands - so that no liquids get into the device. 4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases:... - Page 6 At the end of their useful life, as well as old appliances contain full-value recyclable components, so they should be handed over for recycling. Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20 °C to (+) 50 °C only in its...
Need help?
Do you have a question about the Momo 6606 and is the answer not in the manual?
Questions and answers