Summary of Contents for FM RG 311 A
- Page 1 Instructions for use and installation Electric regenerators Models: RG 311 A / RG 611 A / RG 1011 A ATTENTION: Read these instructions before using the unit.
-
Page 2: Table Of Contents
INDEX CE CERTIFICATION WARRANTY GENERAL AND SAFETY STANDARDS 4.1 Unpacking 4.2 Transport 4.3 Preliminary operations 4.4 Placing the unit INSTALLING THE UNIT 5.1 Electrical connection 5.2 Vapour exhaust from the cooking chamber INSTRUCTIONS FOR USE 6.1 Using the unit for the first time 6.2 Use for baking Ed.:21 –... -
Page 3: Ce Certification
Marca / Trade.: FM CALEFACCIÓN Modelo / Model no.: RG 311 A, RG 611 A, RG 1011 A Nosotros, los abajo firmantes, declaramos bajo nuestra exclusiva responsabilidad que el equipo especificado cumple con la(s) Directiva(s) y Norma(s) mencionadas We, the undersigned, hereby declare under our sole responsibility that the specified... -
Page 4: Warranty
2. Warranty The warranty period is 12 months from the date of purchase the unit. The warranty does not cover damages to the glass, lamps, door seals, insulating material or damages caused by improper installation, maintenance, or lack of maintenance, repair and misuse. To process the repair of a unit under warranty or for any other query, please contact your distributor and reference to the following description table: Distributor:... -
Page 5: General And Safety Standards
Damages, injuries or fatal accidents could be produced due to the non-observance of the manufacturer’s indications. If the oven is installed on supports or overlaying parts, use the ones supplied by FM only and follow the assembly instructions inside the packaging. ... - Page 6 Faults caused by lime or water sediment are not included in the warranty. Failure to comply with these safety standards will release FM from any responsibility and the warranty will become null and void. Risk of burns ...
-
Page 7: Unpacking
Photographs showing the content only and exclusively will not be accepted. In either case, transport incidences should be reported to FM Industrial to manage the replacement of the machine. If visible damages are detected when receiving the packaged machine, indicate “hits to the oven” at the time of the delivery, take photos of the damages and transport agency label on the packaging. -
Page 8: Preliminary Operations
4.3 Preliminary operations Remove the protection film from the unit. Clean the adhesive residues with an appropriate solvent. Never use abrasive or acidic products or tools that may damage the surface. 4.4 Placing the unit Place the oven in the selected work place and keep a safe distance as indicated below. Check that the unit has the sufficient cold air inlets through the ventilation registers ensuring correct operation. -
Page 9: Installing The Unit
5. Installing the unit 5.1 Electrical connection Before connecting the unit to the power supply, check that the electrical grid characteristics match those described in the technical characteristics of each unit. The electrical installation must be performed by authorised technicians and meet the regulations in force. Preferably, the electrical connection should be performed by mounting and electrical outlet of appropriate type and capacity for the maximum current absorbed by the oven phases. -
Page 10: Vapour Exhaust From The Cooking Chamber
5.2 Vapour exhaust from the cooking chamber Exhaust gases may be wet and reach high temperatures. Do not use tubes made of materials not ensuring absolute thermal stability up to 250ºC to channel exhaust gases. A condenser enabling the condensation of vapours and exhaust of those vapours into a drainage may be adapted to treat baking vapours. -
Page 11: Use For Baking
6.2 Use for baking The control panel has 3 luminous LED lights, 1 temperature selector and a temporizer knob. Descripción Descripción Temperature indicator LED 160ºC Led timer/ Continuous mood Temperature indicator LED 140ºC 6-0 minutes/ Continuous mood Temperature selector 140-160ºC There are two variables that can be adjusted by the user: time and temperature. - Page 12 7. Frequently asked questions The following is a list of the most frequent causes / faults / solutions. FAILURE CAUSE SOLUTION No supply voltaje Check the mains voltaje Innapropriate power connection Check the mains connection Thermostat not working Contact a specialised technician The unit does not Timer not working Contact a specialised technician...
Need help?
Do you have a question about the RG 311 A and is the answer not in the manual?
Questions and answers