Download
Share
Print this page
Veichi IOT-GWS2.0 User Manual
  1. Manuals
  2. Brands
  3. Veichi Manuals
  4. GSM/GPRS Modules
  5. IOT-GWS2.0
  6. User manual
Veichi IOT-GWS2.0 User Manual

Veichi IOT-GWS2.0 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Thank you for purchasing the GPRS module from Suzhou VEICHI Electric
Technology Co.
This manual is a random technical information.It is a guiding document for your
correct use, superiority and safe operation, so please read it carefully and keep it properly.
In the process of use, if you have difficult questions or special requirements, please
feel free to contact our office or distributor, or directly contact our customer service center,
we will be happy to serve you.
We are always striving for continuous improvement of our products, so the
information about this series is subject to change without notice.We apologize for any
inconvenience this may cause.
Preface
1
IOT-GWS2.0 User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the IOT-GWS2.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for Veichi IOT-GWS2.0

  • Page 1 IOT-GWS2.0 User Manual Preface Thank you for purchasing the GPRS module from Suzhou VEICHI Electric Technology Co. This manual is a random technical information.It is a guiding document for your correct use, superiority and safe operation, so please read it carefully and keep it properly.

  • Page 2: Chapter 1 Purchase Inspection

    IOT-GWS2.0 User Manual Chapter 1 Purchase inspection 1.1 Purchase inspection 1.Please check the packaging of the product before opening the box to see if it has been damaged due to careless transportation. 2.Whether the specification and model of the product match with the ordered machine type.
  • Page 3 IOT-GWS2.0 User Manual Chapter 2 The main performance characteristics 1、Automatic registration platform server 2、Automatic APN setting 3、Supports transparent transmission over serial port 4、Supports heartbeat maintenance links 5、Support GPS positioning, base station positioning and time calibration 6、Supports offline data storage 7、Support WIFI function 8、Support remote upgrade function...

  • Page 4: Chapter 3 Installation

    IOT-GWS2.0 User Manual Chapter 3 Installation Note: The antenna is installed in the position marked GSM side, as shown in the red box above. Antenn 1. Remove the fixing screws：...
  • Page 5 IOT-GWS2.0 User Manual 2. Open the SIM card slot： 3. Installing the SIM card： 4. Fixed SIM card slot： 5. Recheck dip switch status： In order to confirm normal use after installation, you need to recheck that the dip switch is located in the right ON state to prevent the dip...
  • Page 6 IOT-GWS2.0 User Manual switch state from changing due to the SIM installation process. 3.1 Terminal function description Terminal Function Description name RS485 Communication Interface Power Ground Power Positive Chapter 4 Description of the indicator ● The light is always on when power is applied...
  • Page 7 5.2 Basic operation ● Fix the IOT-GWS2.0 reliably and connect the terminals correctly. ● Bind the IOT-GWS2.0 module to the device well on the IOT platform according to the docked device model (inverter). ● Login to the platform, enter the corresponding management page, and read and write...
  • Page 8 IOT-GWS2.0 User Manual Chapter 6 Platform and cell phone operation method 6.1 IOT platform operation http://gprs.veichi.com:8028 1、Login GPRS platform website： That is, you can enter the login screen as shown below. 2、 Enter the account number and password to log in, the account number and password are provided by our company, and enter the main page of IOT system successfully, as shown in the following figure.
  • Page 9 IOT-GWS2.0 User Manual 6.2 VC.WIFI Mobile App Operation（This app can only be used in close proximity to the device） 1、Open the VC.WIFI mobile app and connect the GPRS module.
  • Page 10 IOT-GWS2.0 User Manual 2、 Perform operations such as reading and writing GPRS parameters, reading and writing drive parameters, monitoring drives in real time, and downloading offline stored data. 6.3 VC.IOT Mobile App Operation（This app can be used regardless of distance）...
  • Page 11 IOT-GWS2.0 User Manual 2、Performs device management, real-time monitoring, remote control, and parameter reading and writing operations.
  • Page 12 IOT-GWS2.0 User Manual Chapter 7 Common fault analysis and treatment 7.1 Indicator light abnormalities 1、The "status indicator" lights up when the initial power is supplied, which means the power supply is normal.If this indicator does not light up, please check whether the power supply wiring is correct and whether the power supply amplitude is normal.
  • Page 13 IOT-GWS2.0 User Manual ②If the SIM card does not exist, it is possible that the SIM card slot is not in good contact, re-install the SIM card and retry (refer to section 3.2 SIM card installation); if the SIM card exists, check whether the network is registered.
  • Page 14 IOT-GWS2.0 User Manual ⑤If not resolved, check whether the SIM card is in arrears, check whether the SIM card traffic is sufficient. ⑥If the network is registered, check that the server port and server address are correct. ⑦If the problem is still not solved, please contact our office or distributor, or contact our...

  • Page 15: Chapter 8 Quality Assurance

    IOT-GWS2.0 User Manual Chapter 8 Quality assurance This product quality guarantee is handled according to the following terms： 8.1 Since the date of purchase of this product, the user can enjoy the following three packages due to product quality problems：...
  • Page 16 IOT-GWS2.0 User Manual Appendix： 一、SMS inquiry/setup command： 1、Basic Parameter Search Command: The command queries the network communication status of GPRS communication module. Format：TCP Return value: T denotes server address; P denotes server port; D denotes GPRS code; cmiot denotes APN name; Imsi denotes operator number; Rssi denotes signal...
  • Page 17 IOT-GWS2.0 User Manual Command Return Value Admin123456 VEICHI: Admin set success. 4、Set APN parameters Description ： This command is used to set the APN parameters of the GPRS communication module Format：APN&+APN name+&+APN User Name+&+APN code Command Return Value APN&cmiot&& VEICHI: Set APN success.
  • Page 18 Wave Underline“XXX”Mark as APN information：From left to right: APN, user name, password, if there is no user name and password can be replaced by lowercase veichi, so that the default will be saved as an empty APN set successfully, will receive SMS “VEICHI:set APN success”。...
  • Page 19 3、 Return to the main interface， then click GPRS parameter （ only connect IOT WIFI to click） ， enter and click the drop-down arrow to open the list. SUZHOU VEICHI ELECTRIC CO., LTD|www.veichi.com|E-mail:overseas@veichi.com ADD: NO.1000 Songjia Avenue,Guoxiang Street,Wuzhong District,Suzhou,China 215124...
  • Page 20 4、 Click “WLAN Network Switch”，open the function，and click “write“ SUZHOU VEICHI ELECTRIC CO., LTD|www.veichi.com|E-mail:overseas@veichi.com ADD: NO.1000 Songjia Avenue,Guoxiang Street,Wuzhong District,Suzhou,China 215124 2 / 4...
  • Page 21 5、 Click “WLAN Network Setting”，input your WIFI information（Must be accurate），and click “write“， end to click “restart” SUZHOU VEICHI ELECTRIC CO., LTD|www.veichi.com|E-mail:overseas@veichi.com ADD: NO.1000 Songjia Avenue,Guoxiang Street,Wuzhong District,Suzhou,China 215124 3 / 4...
  • Page 22 WLAN, and then wait for the small light above the iot card to blink in order to detect the WIFI of the IOT card, and then use the WIFI APP to turn off the WLAN function afterwards. SUZHOU VEICHI ELECTRIC CO., LTD|www.veichi.com|E-mail:overseas@veichi.com ADD: NO.1000 Songjia Avenue,Guoxiang Street,Wuzhong District,Suzhou,China 215124...