Applied Swiss control system assures high quality, endurance and safety of all B.Well products. PRO-10 helps you quickly normalize the humidity in the room and also has the function of the aromatization of the space. Please read through these instructions carefully so that you understand all functions and safety information.
Page 3
Fill the water tank with cool* (not higher 40 °C) distilled or filtered water through the top cover. If you want to use PRO-10 as a diffuser, add the essential oil into the water tank. *DO NOT use hot water Plug in the appliance into the socket.
Instructions for Use PRO-10 5. TECHNICAL SPECIFICATIONS Model PRO-10 Type Ultrasonic Voltage (V) 100-240 V Frequincy (Hz) 50 Hz Power (W) 25 W Capacity (L) 3.5 L Mist volume (ml/h) 80-250 ml/h Steam temperature: cold 30 °C Top water refill...
Page 5
Instructions for Use PRO-10 Turn off and unplug the humidifier. Remove the water tank from the pedestal and pour out any remaining water. Remove the water tank cover. Fill some acid cleaner (citric acid or acetic acid) in the water tank for around 15 minutes, then descale with a cleaning brush.
This warranty doesn’t cover any damages caused by improper using. The policy of the company B.Well provides constant improvement of products. Therefore, the company reserves the right to make complete or partial changes to the products without prior notice and in accordance with production requirements.
Page 7
Air aroma diffuser and humidifier B.Well PRO-10 DEVICE IS NOT A MEDICAL PRODUCT B.Well Swiss AG Bahnhofstrasse 24, 9443 Widnau, Switzerland www.bwell-swiss.ch...
Need help?
Do you have a question about the PRO-10 and is the answer not in the manual?
Questions and answers