Advertisement
Quick Links
PULL-DOWN WAVE SENSOR KITCHEN FAUCET
1 Remove the rubber washer,
.
metal washer and locking nut
from the faucet. Install faucet
through center hole
3.Attach the top control box to
the shortest braided line
coming from the faucet body.
Website:www.casainc.com
Contact Phone Number:888-257-3857
Service Contact:service@casainc.com
2.Re-install the rubber washer
followed by the matal washer
and lock-nut.Hand tighten
then tighten further using
a screw driverto tighten
lock-nut screws
4.Feed the black spray hose
back down through the spout
and faucet body and through
the hole in the sink. Then attach
the bottom of control box to
the black spray hose.
Advertisement
Related Manuals for CASAINC CA-W3085
Summary of Contents for CASAINC CA-W3085
- Page 1 Website:www.casainc.com Contact Phone Number:888-257-3857 Service Contact:service@casainc.com PULL-DOWN WAVE SENSOR KITCHEN FAUCET 2.Re-install the rubber washer 1 Remove the rubber washer, followed by the matal washer metal washer and locking nut and lock-nut.Hand tighten from the faucet. Install faucet then tighten further using...
- Page 2 Website:www.casainc.com Contact Phone Number:888-257-3857 Service Contact:service@casainc.com 5.Install the weight ball to 6.Attach the black connector pull -down hose in place to the black line from control box. 8.Attach ßexible hose to 7.Attach the power connector, water supply. which houses the batteries, to the control box.
Need help?
Do you have a question about the CA-W3085 and is the answer not in the manual?
Questions and answers
How do I bypass the sensor