HOMCOM 713-081V80 Assembly Instruction Manual page 4

EN
Instructions
Prior to use, please firstly connect controller, and then connect the power plug.
Touch the power switch lightly, the product starts working. When stopping using it,
please firstly turn off the controller and then pull out the adapter plug from the outlet.
1.The specification of power adapter: input, AC110-240V, 50-60Hz; output, DC 1 2 V,
2500mA.
2. The product is 3D Kneading massager. Pull through it, it is in standby state. Users
can realize the function control through the hand controller.
3." "Power" key: soft on-off key. In the standby state, press the start key, the
power indicator lamp LED is normally on, press it again, it enters the standby state.